Troubleshooting, Adjustments, & Service
Drive Chain Adjustment
See Inspect, Adjust & Lubricate Drive Chain in the MAIN- TENANCE Section.
Skid Shoe Adjustment
On smooth surfaces such as concrete or asphalt, the scraper bar should scrape the surface. On surfaces such as gravel, the scraper bar should be set high enough so that it will not pick up debris.
1.Loosen the nuts securing the skid shoes (see Figure 5).
2.Raise or lower the scraper bar to the desired height. Use wood blocks to hold the snowthrower in position.
3.Set the skid shoes so that they are in contact with the ground and tighten the skid shoe nuts.
Loosen Nuts to
Adjust
Figure 5. Adjusting Skid Shoes
Electric Chute Rotator Gear | B | |
| ||
1. | Remove the plastic cover (B, FIgure 6) and loosen |
|
| the three taptite screws (A) securing the electric | A |
| spout rotator motor. | |
|
| |
2. | Adjust the motor so that it meshes with the discharge |
|
| chute ring gear and tighten the adjustment screws |
|
| (A). | A |
Figure 6. Discharge Chute Motor Gear Adjustment
A. Adjustment Screws | B. Plastic Cover |
12