Removal &
Normal Installation
A |
B |
C |
F |
E |
D |
Figure 25. Dozer Removal |
|
|
A. Rotator Motor Plug | C. Hair Pin Clip | E. Spring Bracket |
B. Lift Rod | D. Hitch Pin & Clip | F. Clevis Pin & Clip |
Removal
1.Fully raise and support the snowthrower with wood blocks.
2.Release the lift assist spring. Remove the spring and spring bracket (E, Figure 25) from the tractor.
3.Lower the snowthrower.
4.Remove the clevis pin and clip (F) from the remote deflector control and disconnect the control from the mounting bracket.
5.Disconnect the rotator motor plug (A).
6.Disconnect the rear of the lift rod (B) from the lift arm extension. Remove the hair pin clip (C) from the front of the lift rod. Remove the lift rod. Remove the lift arm extension from the tractor (see Hitch Installation Instructions).
22