Cub Cadet Two Stage Snow Thrower warranty Safe Operation Practices, Training, Preparation

Page 4

2

Safe

Operation

WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Practices

WARNING

This symbol points out important safety instructions which, if not followed, could endanger the per- sonal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol, HEED

ITS WARNING!

Your Responsibility

Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult.

4.Never allow adults to operate this machine without proper instruction.

5.Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like.

6.Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

7.Exercise caution to avoid slipping or falling, especially when operating in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller.

2.Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Do not operate without wearing adequate winter outer gar- ments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

4.Use a grounded three-wire extension cord and receptacle for all units with electric start engines.

5.Adjust collector housing height to clear gravel or crushed rock surfaces.

6.Disengage all control levers before starting the engine.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.Let engine and machine adjust to outdoor temperature before starting to clear snow.

Safe Handling of Gasoline

To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refuel- ing.

f.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equip- ment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.).

j.Allow machine to cool at least 5 minutes before storing.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Two-Stage Snow Thrower Ottawa Street South, KITCHENER, Ontario N2G 4J1769-03263 06/06/07Finding and Recording Model Number Table of ContentsCustomer Support Chute Clean-out Tool Your Responsibility Restrict the useSafe Operation Practices TrainingPreparation Your ResponsibilityMaintenance & Storage OperationDo not modify engine Average Useful LifeSetting Up Setting Up Your Snow Thrower Shear Pin Storage optionalSnowthrower Model Drift Cutters If EquippedAll models Clean-Out Tool Lamp Wiring Harness If equippedSkid Shoes Tire Pressure Pneumatic TiresOperating Your Snow Thrower Know Your Snow Thrower$26% #/.42 Stopping The Engine Gas & Oil Fill-UpElectric Starter If Equipped To Engage Drive To Engage AugersRecoil Starter Auger Control TestMaking Adjustments Shift CableChute Control Drive Control & Shift LeverReversible Plastic Skid Shoe Reversible Steel Skid ShoeMaintaining Your Snow Thrower EngineLubrication Shave Plate and Skid ShoesRoll the auger belt off the engine pulley. See Figure Auger Belt ReplacementUnhook the support bracket spring from the frame Drive Belt Replacement Remove and replace belt in the reverse orderFriction Wheel Removal Remove the rubber ring from between the platesOff-Season Storage Wipe equipment with an oiled rag to prevent rustTrouble Shooting Problem Cause RemedyWarranty 10.30.06Auger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Manual Chute Control Part Description RÉF Pièce Optional/en option Part Description RÉF Pièce 30 in/po Remarque Lhabitacle peut être légèrement différentPart Description RÉF Pièce 31AE6GKF500 Part For parts and/or accessories refer to customer support on For parts and/or accessories refer to customer support on Page Garantie Commerciale UtilisationSolution Causes Problème DépannageSouffleuse Propre etCarburant le Videz Gaz ’entretien Régime Transmission De courroie la de RemplacementTarières ’entretien RégimeLubrification Patins et plate LameMoteur Tarière la de Commande RéglagesPatins Plastique en réversible Patins 4-5 FigureEt transmission la de Commande Goulotte la de CommandeVitesses de levier Vitesses de changement de CâbleSouffleuse MainToucher 150F dépasser’huile et d’essence Pleins Modèles certains sur électrique DémarreurModèles Certains sur électrique DémarreurTrans de commande la de Blocage TarièresLa de proximité à Souffleuse laDépart de Volet Souffleuse la de Commandes’essence plein le jamais faites Ne Général d’ordre Recommandations Goulotte la de dégagement de OutilPneumatiques Bandages pneus des Pression Goulotte la de dégagement de OutilÉchéant cas le coupe de Barres Option en cisaillement de goupille la de Remisage Inférieur Employer à moteur à l’huile à et carburant auQuant moteur du d’utilisation notice la consulter veuillez ’assemblage Après .ESSENCE Sans mais d’huile pleinRemisage et Entretien Responsabilité VotreMoyenne utile vie de Durée Gaz de émissions les concernant AvisUtilisation PréparationFormation Responsabilité VotreEst goulotte la de dégagement de outil Un De OutilVente-après Service Modèle de numéro le trouver PourMatières des Table ’utilisation La voir détachées Pièces4J1 N2G Ontario KITCHENER, South, Street Ottawa Phases deux neige à Souffleuse03263-769

Two Stage Snow Thrower specifications

The Cub Cadet Two Stage Snow Thrower is an exceptional piece of equipment designed to tackle the challenges of winter weather with efficiency and ease. This powerful snow removal machine is engineered to provide high-performance snow clearing, making it an essential tool for homeowners dealing with heavy snowfall.

One of the standout features of the Cub Cadet Two Stage Snow Thrower is its robust engine. Equipped with a reliable, heavy-duty engine, this snow thrower delivers exceptional torque and ensures seamless operation even under the most challenging conditions. The engine's efficiency contributes to its ability to clear snow quickly, making it ideal for large driveways and sidewalks.

The two-stage system is another hallmark of this machine. Utilizing an auger and impeller system, the snow thrower can efficiently gather and throw snow a considerable distance away, preventing snow from piling up in unwanted areas. This dual-action mechanism allows for faster clearing times and less manual labor, as it effectively handles both light flurries and heavy, wet snow.

Cub Cadet incorporates advanced technologies in their snow thrower designs. One notable feature is the push-button electric start, which eliminates the hassle of manual starting, especially in frigid temperatures. This convenience ensures that users can quickly power up the machine and begin their snow-clearing tasks without delay.

In terms of control, this model offers intuitive handling and customizable settings. The adjustable skid shoes allow users to modify the clearing height, ensuring effective operation on various surfaces, including driveways, sidewalks, and gravel. Additionally, the six-speed forward and two-speed reverse settings provide optimal maneuverability, allowing users to navigate tight spaces and tricky terrain with ease.

The snow thrower also features ergonomic handles with easy-grip controls, ensuring comfort during extended use. The built-in LED headlights enhance visibility in low-light conditions, allowing users to operate the machine safely during early morning or late evening snow removal.

Durability is a key characteristic of the Cub Cadet Two Stage Snow Thrower. Its solid construction, reinforced housing, and high-quality materials ensure that this equipment can withstand harsh winter conditions year after year. With comprehensive maintenance schedules and readily available customer support, owners can rest assured that their investment is protected.

In summary, the Cub Cadet Two Stage Snow Thrower combines power, innovation, and user-friendly features, making it a top choice for efficient snow removal. Its robust engine, two-stage system, and advanced technology make tackling winter weather more manageable than ever.
Top Page Image Contents