Ariens Official Manual and Warranty Registration Information for Snow Blowers

1

		2
		3
		4
1. Wing Knob	3. Lower Handlebar
2. J-Bolt	4. Upper Handlebar
	Figure 4	OS3000

Install Discharge Chute and Chute Crank (932037, 039, 505, 507, 508)

(Figure 5, 6, and 7)

NOTE: See Figure 5 for the items to install on the unit.

1.Grease chute seat (if not already greased).

2.Remove hardware (and chute crank support bracket on models 932037, 039, 505, 508) from top of engine (Figure 6).

3.Install discharge chute by positioning the chute ring under retainer clip on chute seat.

4.Install chute support bracket (and chute crank support bracket on models 932037, 039, 505, 508) to engine with hardware removed in step 2.

5.Loosen mounting nut on chute bracket and move discharge chute up or down until chute ring is centered between retainer clip and chute seat. Tighten hardware (Figure 7).

6.Slide chute crank through support bracket.

7.Install chute crank to pinion with spring clip.

1

3

2

4
1. Discharge Chute	3. Chute Crank
2. Spring Clip	4. Pinion

	Figure 5			OS3500
932507		932037, 039, 505, 508
4	5	5	4	6
4
8
				3
			2
			1
			7	OS4000
1. Discharge Chute			5. Chute Support
2. Spring Clip			Bracket
3. Chute Crank			6. Chute Crank
4. Hardware			Support Bracket
			7. Chute Seat
			8. Retainer Clip
	Figure 6

GB - 10