Ariens 932037 - 724 manual Service and Adjustments, General Lubrication, Discharge Chute Deflector

Page 19

GENERAL LUBRICATION

IMPORTANT: Wipe each fitting clean before and after lubrication.

IMPORTANT: DO NOT allow grease or oil to get on friction disc, friction plate or belts.

NOTE: Apply Stens Mix Hi-Temp Grease or equivalent to the lubrication fittings. See Service Parts.

Sno-Thro should be lubricated (Figure 12) at beginning of season or every 25 operating hours.

Auger Shaft

NOTE: To grease auger shaft, remove shear bolt nuts, and shear bolts. Turn auger on shaft while applying grease at zerk fittings. Replace shear bolt per instructions in Service and Adjustments.

 

OS1373

Grease

Oil

 

Figure 12

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

DISCHARGE CHUTE DEFLECTOR

Deflector must stay in selected position while throwing snow.

To adjust, loosen then retighten hardware to desired deflector drag force (Figure 13).

Adjusting

Hardware

Discharge Chute

Deflector

Figure 13

DISCHARGE CHUTE

OS0113

If chute does not stay in position while operating, tighten nut on carriage bolt at pivot point to increase tension on spring (Figure 14).

GB - 19

Image 19
Contents Sno-Thro Handgeführte Schneefräse Spazzaneve Semovente ’opérateur Vibrationswerte An den Händen Introduction Table of ContentsSafety Required Operator Training Safety Decals LocationsDo not allow adults to operate unit without proper training Safety RulesPage Unfold Handlebar Figure AssemblyAssembly Tools Required932507 932037, 039, 505 Check Engine Crankcase Oil Discharge ChuteCheck Tire Pressure Check Auger Gearcase OilControls and Features Operation Controls and FeaturesRecoil Starter Handle Snow Clean-Out ToolThrottle Electric StarterPRE-START Filling Fuel TankStarting and Shut OFF To Stop in AN EmergencySnow Removal MaintenanceService Position TravelingMaintenance Schedule Discharge Chute Service and AdjustmentsGeneral Lubrication Discharge Chute DeflectorScraper Blade Speed Selector AdjustmentFor Replacement RunnersRemove Attachment Drive Belt Attachment Drive Belt ReplacementImportant Belt Finger Must be Replace Attachment Drive BeltAttachment CLUTCH/BRAKE Adjustment Traction Drive Belt ReplacementTraction Drive Clutch Adjustment Remove Friction Disc Friction Disc ReplacementLong Term Reinstall Friction DiscStorage Short TermAccessories Service PartsTroubleshooting Reverse Does notOperate ForwardSize and Weight SpecificationsYear Limited Sno-Thro Warranty
Related manuals
Manual 31 pages 47.91 Kb

932508 - 624, 932505 - 724, 932507 - 520, 932039 - 624, 932037 - 724 specifications

Ariens has long been celebrated for its commitment to quality and durability in outdoor power equipment, and the Ariens 932038, 932507, 932039, 932505, and 932508 models are a testament to that legacy. These snow blowers offer a blend of robust performance, advanced technology, and user-friendly features that make them essential for managing winter weather.

The Ariens 932038 model stands out with its 5520 engine, delivering dependable power designed to tackle heavy snowfalls. Its 24-inch clearing width ensures efficient snow removal, while the high-quality, heavy-duty construction guarantees long-lasting performance. Equipped with an adjustable auger, the 932038 can handle a variety of snow conditions, making it versatile for different scenarios.

Similarly, the 932507 model, featuring a powerful 520cc engine, provides significant clearing capabilities. Users will appreciate the 24-inch clearing width and the ability to throw snow up to 50 feet. The unique design includes oversized tires that enhance traction and maneuverability, ensuring users can confidently navigate through driveways and pathways even in deep snow.

The Ariens 932039 model, powered by the 624cc engine, takes snow removal a step further. This powerful machine's 26-inch clearing width allows for faster snow processing, and its auto-turn steering technology provides effortless handling around obstacles, a critical feature for those with tight driveways or pathways.

With the 932505 model, users can utilize the 724cc engine, making it one of the more powerful options in this lineup. Its 28-inch clearing width couples with an advanced impeller system that maximizes snow throwing distance, making it perfect for large areas. Additionally, the heated handgrips improve comfort during prolonged use in frigid conditions.

Finally, the Ariens 932508, equipped with a 624cc engine, combines strength with ease of use. Its user-friendly control panel and electric start feature provide convenience, making it ideal even for those less experienced with snow blowers. The combination of a 26-inch clearing width ensures efficient snow removal, while the durable construction promises longevity.

Each of these Ariens models comes with a host of features designed for efficiency. From adjustable speed settings to high-impact and rust-resistant materials, these machines are built to withstand the rigors of winter. Whether facing light snow or heavy drifts, the Ariens 932038, 932507, 932039, 932505, and 932508 snow blowers deliver the reliability and performance users expect, ensuring that winter does not hinder outdoor activities.