Ariens 932507 - 520, 932038 - 5520, 932037 - 724, 932039 - 624 manual Filling Fuel Tank, Pre-Start

Page 15

Axle Lock Pin (Figure 10)

Wheel Unlocked

Axle

Wheel Locked Lock

Pin

Figure 10

Use the axle lock pin to lock or unlock the right wheel. Lock the right wheel to increase traction; unlock the right wheel to allow for easier turning of the unit.

Scraper Blade

The scraper blade allows the back of the housing to keep better contact with the surface being cleared. It also prevents damage to the housing from normal wear.

IMPORTANT: DO NOT allow Scraper Blade to wear too far or Auger/Impeller housing will become damaged.

Runners

The runners control the distance between the scraper blade and the ground. Adjust runners equally to keep blade level with the ground.

Refer to Pre-Startfor recommended settings.

FILLING FUEL TANK

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

Fuel Shut-Off Valve

IMPORTANT: The fuel shut-off valve MUST be in the closed position prior to transporting the unit.

The fuel shut-off valve has two positions:

•Closed Position: Use this position to service, transport, or store the unit.

•Open Position: Use this position to run the unit.

To add fuel to fuel tank:

1.ALWAYS place unit in open or well- ventilated area.

2.Stop engine and allow to cool.

3.Clean Fuel Cap and surrounding area to prevent dirt from entering Fuel Tank.

4.Remove Cap.

IMPORTANT: DO NOT use gasohol or gasoline containing alcohol. See Engine Manual for correct type and grade of fuel.

5.Fill fuel tank to within 1/2 in. (1.2 cm) below bottom of filler neck with unleaded gasoline.

NOTE: Tank capacity is 3.5 qt (3.3 L) (932037, 039, 505, 509) or 2 qt (1.96 L) (932038, 507).

6.Replace Fuel Cap and tighten.

7.ALWAYS clean up any spilled fuel.

PRE-START

1. Frozen Impeller

IMPORTANT: Before starting engine, check impeller to be sure it is not frozen.

To check impeller:

1.With key in “Stop” position, squeeze Attachment Clutch Bail to Engaged position.

2.Pull Recoil Starter Handle.

3.If Impeller is frozen, (cannot pull Starter Handle) move unit to a heated area and thaw to prevent possible damage.

2.Check Function of Clutches

If clutches do not engage or disengage properly, adjust or repair before operation (see

Service and Adjustments).

3. Adjust Axle Lock

Use the axle lock pin to lock or unlock the right wheel. Lock the right wheel to increase traction; unlock the right wheel to allow for easier turning of the unit.

GB - 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Sno-Thro Handgeführte Schneefräse Spazzaneve Semovente ’opérateur Vibrationswerte An den Händen Introduction Table of ContentsSafety Required Operator Training Safety Decals LocationsDo not allow adults to operate unit without proper training Safety RulesPage Unfold Handlebar Figure AssemblyAssembly Tools Required932507 932037, 039, 505 Check Engine Crankcase Oil Discharge ChuteCheck Tire Pressure Check Auger Gearcase OilControls and Features Operation Controls and FeaturesRecoil Starter Handle Snow Clean-Out ToolThrottle Electric StarterPRE-START Filling Fuel TankStarting and Shut OFF To Stop in AN EmergencySnow Removal MaintenanceService Position TravelingMaintenance Schedule Discharge Chute Service and AdjustmentsGeneral Lubrication Discharge Chute DeflectorScraper Blade Speed Selector AdjustmentFor Replacement RunnersRemove Attachment Drive Belt Attachment Drive Belt ReplacementImportant Belt Finger Must be Replace Attachment Drive BeltAttachment CLUTCH/BRAKE Adjustment Traction Drive Belt ReplacementTraction Drive Clutch Adjustment Remove Friction Disc Friction Disc ReplacementLong Term Reinstall Friction DiscStorage Short TermService Parts AccessoriesTroubleshooting Reverse Does notOperate ForwardSize and Weight SpecificationsYear Limited Sno-Thro Warranty
Related manuals
Manual 31 pages 47.91 Kb

932508 - 624, 932505 - 724, 932507 - 520, 932039 - 624, 932037 - 724 specifications

Ariens has long been celebrated for its commitment to quality and durability in outdoor power equipment, and the Ariens 932038, 932507, 932039, 932505, and 932508 models are a testament to that legacy. These snow blowers offer a blend of robust performance, advanced technology, and user-friendly features that make them essential for managing winter weather.

The Ariens 932038 model stands out with its 5520 engine, delivering dependable power designed to tackle heavy snowfalls. Its 24-inch clearing width ensures efficient snow removal, while the high-quality, heavy-duty construction guarantees long-lasting performance. Equipped with an adjustable auger, the 932038 can handle a variety of snow conditions, making it versatile for different scenarios.

Similarly, the 932507 model, featuring a powerful 520cc engine, provides significant clearing capabilities. Users will appreciate the 24-inch clearing width and the ability to throw snow up to 50 feet. The unique design includes oversized tires that enhance traction and maneuverability, ensuring users can confidently navigate through driveways and pathways even in deep snow.

The Ariens 932039 model, powered by the 624cc engine, takes snow removal a step further. This powerful machine's 26-inch clearing width allows for faster snow processing, and its auto-turn steering technology provides effortless handling around obstacles, a critical feature for those with tight driveways or pathways.

With the 932505 model, users can utilize the 724cc engine, making it one of the more powerful options in this lineup. Its 28-inch clearing width couples with an advanced impeller system that maximizes snow throwing distance, making it perfect for large areas. Additionally, the heated handgrips improve comfort during prolonged use in frigid conditions.

Finally, the Ariens 932508, equipped with a 624cc engine, combines strength with ease of use. Its user-friendly control panel and electric start feature provide convenience, making it ideal even for those less experienced with snow blowers. The combination of a 26-inch clearing width ensures efficient snow removal, while the durable construction promises longevity.

Each of these Ariens models comes with a host of features designed for efficiency. From adjustable speed settings to high-impact and rust-resistant materials, these machines are built to withstand the rigors of winter. Whether facing light snow or heavy drifts, the Ariens 932038, 932507, 932039, 932505, and 932508 snow blowers deliver the reliability and performance users expect, ensuring that winter does not hinder outdoor activities.
Top Page Image Contents