Meyer 7200 manual Adjustments, Front Drive Roller Chains

Page 17

ADJUSTMENTS

WARNING: DISCONNECT PTO DRIVE SHAFT AND HYDRAULIC HOSES (RELIEVE HYDRAULIC PRESSURE) BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS SPREADER. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.

FRONT DRIVE ROLLER CHAINS

There are six roller chain drives located at the front of the spreader. Regularly check that all tensioning springs are in serviceable condition for automatic roller chain tightening. Manually adjust spring tensioners (as needed) by turning double locknuts on all tensioning bolt/idler assemblies. Proper roller chain tension is when 1/4" to ½" deflection occurs on the slack side of the chain. Regularly re-check all roller chain tensions. Keep all roller chains tight at all times! For clarity purposes, the following illustrations detail each roller chain reduction separately.

NOTE: The side bars of the roller chains will wear into the idler nylon rollers up to the rollers of the roller chain forming grooves. These grooves will serve as a guide when the roller chain loosens due to normal use. From this point on, after tightening, the idler nylon rollers should run for hundreds of hours without any noticeable wear.

RH TOP

IDLER NYLON

SPROCKET

 

 

PTO

 

INPUT

ROLLER

 

CHAIN

 

 

SPRING LOADED

 

ADJUSTER

FIGURE 7. FIRST CHAIN DRIVE

LH TOP SPROCKET

ROLLER CHAIN

IDLER NYLON

ROLLER

SPRING LOADED

ADJUSTER

FIGURE 8. SECOND CHAIN DRIVE

The first chain drive (PTO input shaft to the large RH top sprocket, figure 7) is automatically tensioned by a spring loaded idler nylon roller. The extension spring should extend 2” from its neutral 5” total length.

Manual adjustment for the automatic tensioning idler, nylon roller assembly is located at the left rear of the spreader’s front bearing mounting plate.

The second chain drive (large RH top sprocket to the large LH top sprocket, figure 8) is automatically tensioned by a spring loaded idler nylon roller. The extension spring should extend 2“ from its neutral 5" total length.

Manual adjustment for the automatic tensioning idler, nylon roller assembly is located at the left rear of the spreader’s front bearing mounting plate.

Model 7200

-17-

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 12/03 Manufactured byTable of Contents VII MANUFACTURER’S WarrantyModel No Serial No Date of Purchase IntroductionRemember Farm Equipment Buyers Trust the Name Meyer Safety Precautions Safety First Decal H. Part no Industrial Series Gear BoxesPRE-OPERATION Tractor Drawbar & PTO SpecificationMaximum Spreader Load Weights Material Estimated Weight PER Cubic FootTransporting Tractor Towing Size RequirementsFreezing Weather Operation USE of Safety ChainOptional Truck Mount Spreaders Model Unloading OperationLoading Description Shear Sprocket InstructionsStorage After USE Adjustment on the Cutout Clutch PTO SetupPTO Driveline Driveline AttachmentNormal Operation Maintenance InformationLubrication Front Drive Roller Chains AdjustmentsThird Chain Drive Shear ARM Material Guide Adjustment Spring Loaded Material Guide AdjustmentSpinner Material Guides 1/2Weekly Lubrication every 25-30 loads LubricationDaily Lubrication every 8-12 loads Monthly Lubrication PTO Drive Shaft Assembly Repair PartsKEY Meyer Part Description RPM-20 Spline / 1-3/4 Yoke WWE2480 80 Degree C.V KEY Part no Description KEY DescriptionAuger Drive Third Reduction This Page Intentionally Blank Front Shield & Side Shaft Drive KEY Description Auger Drive First Reduction RPM Auger Drive Second Reduction Auger Drive Second Reduction RH Auger Drive Final Reduction RH Auger Drive Final Reduction LH Auger Drive Final Reduction This Page Intentionally Blank BOX, Augers & Side Shaft KEY Description Unloading Gate and Gate Indicator Unloading Gate and Gate Indicator Spinners & Gearbox Shaft Drive Spinners & Gearbox Shaft Drive Spinner Gear Reducer Left Hand 11 #19-0029 KEY Description Spinner Gear Reducer Center 11 #19-0030KEY RPM Drive Part no Description Corner Gear Reducer Right HandHUBS, Axle & Tandem Assembly LADDER, Third AUGER, Gate Indicator & Lighting LADDER, Third AUGER, Gate Indicator & Lighting OIL-KIT KEY OEM Part no Description Instructions for Automatic Chain Oiler Symptom Problem Solution Augers Meyer Industrial Spreader Trouble ShootingDate Service Performed Meyer Industrial Spreader Maintenance RecordTire Inflation Tire Size PLY PSI Meyer Equipment Wheel TorqueThis Page Intentionally Blank Model Model Model Meyer Industrial Spreader SpecificationsSpecifications Subject to Change Without Notice

7200 specifications

The Meyer 7200 is a cutting-edge agricultural tractor that stands out in the competitive landscape of modern farming equipment. Designed with efficiency and versatility in mind, it caters to the diverse needs of farmers and agricultural professionals. One of the primary features of the Meyer 7200 is its robust engine, which delivers remarkable power while maintaining fuel efficiency. With a maximum horsepower rating that exceeds expectations, this tractor is capable of handling a wide range of tasks, from plowing and tilling to hauling heavy loads.

The Meyer 7200 incorporates advanced technology that enhances its performance and usability. One notable technological feature is the integrated GPS guidance system, which assists farmers in optimizing field operations by providing precise navigation and mapping capabilities. This system not only minimizes overlaps during planting and spraying but also maximizes efficiency and productivity. The tractor is also equipped with an intuitive touchscreen interface, allowing operators to easily monitor performance metrics and adjust settings on-the-go.

Another significant characteristic of the Meyer 7200 is its exceptional maneuverability. The tractor is designed with a compact frame and a superior turning radius, making it adept at navigating tight corners and various terrains. This feature is particularly beneficial in smaller fields or crowded workspaces. Additionally, the tractor boasts an advanced suspension system that enhances ride comfort and stability, reducing operator fatigue during long hours in the field.

Durability is a hallmark of the Meyer 7200, with components built to withstand the rigors of daily farm work. The high-quality materials and robust construction ensure longevity and minimize maintenance requirements. Farmers can rely on the Meyer 7200 to perform reliably under heavy workloads, even in challenging weather conditions.

Safety is also a priority, with features such as roll-over protection structures and advanced braking systems. These safety enhancements provide peace of mind for operators, allowing them to focus on their tasks without added worry.

In summary, the Meyer 7200 is a powerful, efficient, and technologically advanced tractor that meets the demands of modern agriculture. With its powerful engine, integrated GPS system, exceptional maneuverability, durability, and safety features, the Meyer 7200 is an indispensable tool for farmers looking to elevate their productivity and ensure successful harvests. As the agricultural landscape continues to evolve, the Meyer 7200 stands ready to meet the challenges of today and tomorrow.
Top Page Image Contents