Dig a 1” deep straight line to insert the front lip of the Hold Down Plates.
Assemble the Hold Down Plates on top of the Bottom Supports overlaying them so that the four holes on each end match the four holes from the Bottom Support as shown on image H.
The front lip must face down into the ground. It must not face up.
Insert the four 5/16” - 18 x 1/2” hex head bolts and nuts and tighten.
H
1” Deep Trench
STRAP ASSEMBLY FOR SLIM STYLE OVAL POOLS
The screws joining the straps must be inserted from the top to prevent the screw putting a hole in the liner once the pool is filled with water.
SIZES
12’ x 8’
15’ x 10’ 16’ x 10’ 18’ x 12’ 24’ x 12’
5/16” - 18 x 1/2”
Hex Head Screws
Hold Down
Plates
| Straps |
| Hold Down |
5/16” - 18 Hex Nuts | Plates |
SIZES
24’ x 15’ 30’ x 15’
| 5/16” - 18 x 1/2” | Hold Down | |
| Hex Head Screws | ||
Hold Down | Plates | ||
| |||
Plates |
|
|
Straps
5/16” - 18 Hex Nuts
SIZES
33’ x 18’
5/16” - 18 x 1/2”
Hex Head Screws
Hold Down | Hold Down |
Plates | Plates |
Straps
5/16” - 18 Hex Nuts
13