INSTALLING TOP COVERS
FOLLOW THE INSTRUCTIONS BELOW
FOR THE COVERS FOR YOUR PARTICULAR POOL
4", 6" & 7" DELUXE TOP COVERS
These covers don’t require cage nuts or top cover screws.
For pools with the new 1-piece deluxe top covers, simply snap the cover into place, aligning the tab on the bottom of the cover with the slot in the top plate of pool (fig.A only.)
For 2-piece covers, insert bottom section into top (fig. 1) so that it becomes one unit (fig. 2). Then snap cover into place aligning tab on bottom of cover with slot in the top plate of pool (fig. 3) and secure with a #10 x 1" screw (fig. 4).
1
2
3
#10X1” SELF
TAPPING SCREW
IMPORTANT: Make sure that the inside edge of the top cover is securely positioned over the edge of the ledges
