| 20 |
* NOTE: CAGE NUTS NOT NEEDED ON ALL POOLS - CHECK YOUR PACKING LIST
Before the top plates are installed it is necessary to attach the cage nuts* in their appropriate locations as shown in the figures at right.
Using a pliers, squeeze together the spring sides of the cage nuts and insert them
into the top plate from underneath.
TOP PLATE
CAGE NUT
1/4” CAGE NUT | PLIERS |
VERTICALS, TOP PLATES AND RAILS | 21 |
VERTICAL
VERTICAL
OVER SUPPORT POST
If fencing or decking is to be installed, refer to the deck and fence instructions before installing the verticals. The holes indented in the face of the verticals must be on top.
No. 12 x 1/2”
Sheet Metal
Screw
If your pool is equipped with feature tape, it is best to apply it to the verticals at this time.
Attention:
If your pool has the 2 piece resin vertical, insert the flat piece into the verticals for the round side of the pool. The verticals over the Support Posts on the straight side of the pool do not need this sheet.
21