PROTECT YOUR LINER
14
Once the wall is closed and
WALL
screws and nuts are tightened SEAM securely, cover the screw heads
on the inside of the pool with a cloth tape all the way from top to bottom of wall. If the filter inlet and outlet are not used, tape over the prescored areas on the inside of the pool wall.
Cloth tape or duct tape is available through your local pool dealer or hardware store.
|
|
| SKIMMER | |
|
|
| INLET FITTING | |
| VIEW FROM |
|
| SKIMMER |
|
|
| ||
|
|
| RETURN | |
INSIDE OF POOL |
| FITTING | ||
|
|
|
|
|
CLOTH TAPE
OR DUCT TAPE
RECHECKING YOUR WORK | 15 |
Measure from the last strap to the outer end of the pool.
Measurements in both ends should be equal. Also make sure that the sides of the pool between the straps are straight.
Confirm that the strap assemblies are "square"
by measuring diagonally across from the first strap to the last strap.
Make sure that the Support Posts on each side of the pool are lined up in a straight row.
POOL WALL
36” | 36” | 36” | 36” | 36” |
36” | 36” | 36” | 36” | 36” |
Also, the measurements from the center of one strap to the center of the next one should be 36".
FILLING THE TRENCHES | 16 |
Fill the trenches and all open areas in and around the Bottom Supports with screened damp earth or
16