Swim'n Play 420745-15 warranty TWO-PIECE Wrap around Cover Pedestal, Inside Cover

Page 26

7" AND 9” TWO-PIECE WRAP AROUND COVER

AND PEDESTAL

Slide the inside cover (the cover which will be closest to the inside of the pool) into position and align the hole in the cover with the cage nut attached to the top plate. Secure using the 1/4”-20 x 3/4” screw provided. Slide the outside cover onto the inside cover. Make sure the inside cover is in the slot of the outside cover. Align the holes on the side of the bottom wrap with the holes on the top of the vertical. Secure the cover using the #12 x 1/2” screws provided. The two

(2)edges of the covers should be parallel. Before tightening the screws, press the two covers firmly together.

INSIDE COVER

9” WRAP AROUND COVER

7” WRAP AROUND COVER

1/4”-20 X 3/4”

STAINLESS STEEL SCREW

#12X1/2” SCREW 1 ON EACH SIDE

If your pool vertical does not have holes, simply use the cover or the pedestal as a template and drill through the vertical using a 9/64" diameter drill bit, being careful not to damage the pool wall.

WRAP AROUND PEDESTAL

Place the pedestal onto the bottom of the vertical and align the holes on the side of the wrap with the holes on the bottom of the vertical. Secure the pedestal using the #12 x 1/2” screws provided.

#12X1/2” SCREW 1 ON EACH SIDE

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Oval Pool Contract Installations Introduction Some Friends To Help OUTInstallation Assembly Steps Deluxe Pools Supreme Pools Fig. DActual Pool Dimensions Clearance Size Preparing the GroundLeveling the Ground Nail Clearance Radius Center Stake CARPENTER’S LevelSide Support Assembling Prepare Buttress Trenches Important All trenches must be 3 feet apart from its centerEND Support Post Assembly Plates & Vertical Plates AssemblyCenter Support Post Assembly Assembling Bottom Straps Hold Down Plates Level Support AssemblyFilling Trenches & Bottom Supports Strap Assembly for Slim Style Oval Pools SizesExample of Basic Layout Bottom Rail and Strap LayoutInsert Wall Into Bottom Rails Closing the Wall Serrated Flange NUTFilling the Trenches Protect Your LinerRechecking Your Work Pool WallOnly THRU-THE-WALL SkimmerEarth Mound Earth MoundCorrect Liner InstallationLiner IncorrectEZ Hook Liner Installation CoveVertical Over Support Post PRE-ASSEMBLY of TOP PlatesVERTICALS, TOP Plates and Rails Rail Installing Ledges Placement of Warning LabelsInstalling TOP Covers 7 Deluxe TOP CoversTOP Cover Ledge 9 TWO-PIECE Wrap around Cover Pedestal Inside CoverOutside Cover WrapLogo TOP Cover Safety Brochures and Education Programs Pool User Warning LabelsSafety Tips Rules and Regulations Winter Care Preventative Maintenance TipsLife Saving Equipment Care of Pool WaterANY Objects That MAY Provide Access to the Pool
Top Page Image Contents