ViewSonic PJD6683WS, PJD6653W, PJD6553W, PJD6353S Controlling the projector through a web browser

Page 45

If you are in a non-DHCP environment:

1.Repeat steps 1-3 above.

2.Press to highlight DHCP and press / to select Off.

3.Contact your ITS administrator for information on the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings.

4.Press to select the item you want to modify and press MODE/ENTER on the projector or Enter on the remote control.

5.Press / to move the cursor and the press / to enter the value.

6.To save the settings, press MODE/ENTER on the projector or Enter on the remote control. If you do not want to save the settings, press MENU/EXIT on the projector or Menu on the remote control.

7.Press to highlight Apply and press MODE/ENTER on the projector or Enter on the remote control.

• If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings will display 0.0.0.0. Make sure the cables are properly connected and perform the procedures above again.

•If you wish to connect to the projector in its standby mode, be sure you have selected RJ45 and obtained the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server information when the projector is on.

Controlling the projector through a web browser

Once you have the correct IP address for the projector and the projector is on or in standby mode, you can use any computer that is on the same local area network to control the projector.

• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.

•The screen shots in this manual are for reference only, and may differ from the actual design.

1.Enter the address of the projector in the address bar of your browser and press Enter.

2.The main page of the Network Control appears.

3

4

5

Accessing to Network Settings or Email Alert page requires Administrator password. The default password is "0000".

3.This page allows you to make adjustments to the AMX and SNMP settings. In the AMX device discover row, when ON is selected, the projector can be detected by

40

Page 44 Page 46
Image 45
Page 44 Page 46
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Safety Instructions Important safety instructionsSafety instructions for ceiling mounting of the projector Introduction Projector featuresShipping contents Projector exterior view Front/upper sideRear/lower side Projector Controls and functionsRemote control Operating the Laser pointer Remote control codeUsing the remote mouse control Remote control effective rangeSet the input signal to D-Sub / Comp , D-Sub / Comp or Hdmi Replacing the remote control batteries Choosing a location Positioning your projectorPJD5126/PJD5226 /PJD6223 Projection dimensionsPJD6353/PJD6353s/PJD6383/PJD6383s PJD6253PJD5226w PJD5226w/PJD6553w/PJD6653w/PJD6653wsPJD6653w/PJD6653ws/PJD6683w/PJD6683ws PJD6553wPJD6683ws PJD5126/PJD5226 PJD5226w ConnectionConnecting a computer Connecting a computer or monitorConnecting a monitor To connect the projector to a notebook or desktop computerConnecting audio Connecting Video source devicesBest video quality Better video qualityConnecting a Component Video source device Connecting an Hdmi deviceTo connect the projector to an Hdmi device To connect the projector to a Component Video source deviceConnecting a composite Video source device Connecting an S-Video source deviceTo connect the projector to an S-Video source device To connect the projector to a composite Video source deviceStarting up the projector OperationUse / to highlight the System Setup Basic menu Using the menusSystem Setup Basic System Setup AdvancedUtilizing the password function Setting a passwordIf you forget the password Changing the password Entering the password recall procedureDisabling the password function Changing Color Space Switching input signalAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image clarityCorrecting keystone Magnifying and searching for detailsSelecting the aspect ratio About the aspect ratio Picture modes for different types of signals Selecting a picture modePC input signals D-Sub / Comp /2 analog RGB Optimizing the imageFine-tuning the image quality in user modes Using Screen ColorSetting the User 1/User 2 mode Go to the Picture Color Mode menuAdjusting Contrast Adjusting BrightnessAdjusting Color Adjusting TintAbout color temperatures To adjust the settingsColor Management To cancel the timer, perform the following steps Setting the presentation timerLocking control keys Hiding the imageFreezing the image Operating in a high altitude environmentCreating your own startup screen To highlight LAN Control Settings and press MODE/ENTER on Configuring the LAN Control SettingsControlling the projector through a LAN environment If you are in a Dhcp environmentIf you are in a non-DHCP environment Controlling the projector through a web browserCategory Item Input Length Maximum Number Characters You can press To reveal More buttons About Crestron e-ControlIP ID Crestron RoomView Enabled User Password New Password Confirm Admin PasswordPower Saving Using the projector in standby modeShutting down the projector PJLink, SNMP, AMX and Xpanel formats supportedMenu system Menu operationBasic SourceDhcp AdvancedInformation Description of each menu Temperature Color ModeSettings ReferenceQuick Auto TimerSearch Color SpaceBlank Timer Auto PowerLanguage ProjectorMenu AudioClosed CaptionSecurity Reset AllRemote Control CodeCare of the projector MaintenanceSetting Auto Power Off Setting Lamp Mode as EconomicLamp information Getting to know the lamp hourStatus Message Timing of replacing the lampReplacing the lamp Type number RLC-071Type number RLC-077 Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Power events IndicatorsLight Status & Description Lamp eventsCause Remedy TroubleshootingProjector specifications SpecificationsInput terminal RequirementsPJD5126/PJD5226/PJD5226w Ceiling mount installation DimensionsSupported timing for PC input Timing chartSupported timing for Video and S-Video inputs Supported timing for Component-YPbPrinputCopyright information CopyrightDisclaimer Appendix IR control tableCode a Code B RS232/RJ45 command table RS232 command tableRJ45 response table Pin assignment for this two endReset Execute Front Table Horizontal Brightest Gain Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 2 pages 56.35 Kb

PJD5226, PJD6353, PJD6383S, PJD6683WS, PJD6223 specifications

The ViewSonic PJD6553W is a high-performance DLP projector designed to meet the needs of both educational environments and business presentations. With a resolution of 1280 x 800, this projector provides a widescreen aspect ratio of 16:10, making it suitable for displaying a variety of content, from PowerPoint presentations to HD videos.

One of the standout features of the PJD6553W is its brightness level, boasting 3,200 lumens. This high brightness ensures that images remain clear and vibrant even in well-lit rooms, allowing for flexible usage in various settings without the need for dimming lights.

The PJD6553W employs DLP technology, which is known for its reliability and consistent image quality. This technology helps in delivering sharp and crisp details, vital for conveying information effectively. Additionally, the projector features a high contrast ratio of 15,000:1, which enhances the depth and richness of colors, ensuring that presentations are not only informative but visually engaging.

Another significant aspect of the ViewSonic PJD6553W is its long lamp life, which can last up to 6,000 hours in Eco mode. This reduces the frequency of replacements, lowering maintenance costs and ensuring that users can focus on their presentations rather than on projector upkeep.

Connectivity options are extensive with the PJD6553W, including HDMI, VGA, and composite inputs, allowing for seamless integration with various devices such as laptops, tablets, and media players. The inclusion of an integrated speaker enhances the overall experience, providing audible support for presentations without the need for external speakers.

For added convenience, the PJD6553W also features a 1.1x optical zoom, which provides flexibility in projector placement and allows for adjustments without needing to physically move the projector. Its compact design and lightweight nature make it portable, suitable for both fixed installations and on-the-go presentations.

In summary, the ViewSonic PJD6553W is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, excellent connectivity options, long lamp life, and superior image quality make it an ideal choice for educators and business professionals seeking impactful visual presentations.
Top Page Image Contents