ViewSonic PJD6553W, PJD6353S, PJD6383S, PJD6683WS, PJD6653WS Resetting the lamp timer

Page 66

10.Place the lamp protection film supplied

with the new lamp on the lamp

2

compartment.

11. Replace the lamp cover on the

 

projector.

1

12.Tighten the screws that secure the lamp cover.

CAUTION

Loose screw may cause a bad connection, which could result in malfunction.

• Do not over tighten the screws.

13.Restart the projector.

CAUTION

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

14.After the startup logo, open the On-Screen Display (OSD) menu.

15.Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER on the projector or ENTER on the remote control. The Lamp Settings page is displayed.

16.Press to highlight Reset lamp timer and press MODE/ENTER on the projector or ENTER on the remote control. A warning message is displayed asking if you want to reset the lamp timer.

17.Highlight Reset and press MODE/ENTER on the projector or ENTER on the remote control. The lamp time will be reset to '0'.

CAUTION

Do not reset if the lamp is not new or replaced as this could cause damage.

Notice

Reset Lamp Timer?

Reset Cancel

61

Image 66
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorRemote control Remote control code Operating the Laser pointerUsing the remote mouse control Remote control effective rangeSet the input signal to D-Sub / Comp , D-Sub / Comp or Hdmi Replacing the remote control batteries Positioning your projector Choosing a locationProjection dimensions PJD5126/PJD5226 /PJD6223PJD6253 PJD6353/PJD6353s/PJD6383/PJD6383sPJD5226w/PJD6553w/PJD6653w/PJD6653ws PJD5226wPJD6553w PJD6653w/PJD6653ws/PJD6683w/PJD6683wsConnection PJD6683ws PJD5126/PJD5226 PJD5226wConnecting a monitor Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerBest video quality Connecting Video source devicesConnecting audio Better video qualityTo connect the projector to an Hdmi device Connecting an Hdmi deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceConnecting a composite Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorSystem Setup Basic Using the menusUse / to highlight the System Setup Basic menu System Setup AdvancedUtilizing the password function Setting a passwordIf you forget the password Entering the password recall procedure Changing the passwordDisabling the password function Switching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratio PC input signals D-Sub / Comp /2 analog RGB Selecting a picture modePicture modes for different types of signals Optimizing the imageSetting the User 1/User 2 mode Using Screen ColorFine-tuning the image quality in user modes Go to the Picture Color Mode menuAdjusting Color Adjusting BrightnessAdjusting Contrast Adjusting TintAbout color temperatures To adjust the settingsColor Management Setting the presentation timer To cancel the timer, perform the following stepsFreezing the image Hiding the imageLocking control keys Operating in a high altitude environmentCreating your own startup screen Controlling the projector through a LAN environment Configuring the LAN Control SettingsTo highlight LAN Control Settings and press MODE/ENTER on If you are in a Dhcp environmentControlling the projector through a web browser If you are in a non-DHCP environmentCategory Item Input Length Maximum Number Characters About Crestron e-Control You can press To reveal More buttonsIP ID Enabled User Password New Password Confirm Admin Password Crestron RoomViewShutting down the projector Using the projector in standby modePower Saving PJLink, SNMP, AMX and Xpanel formats supportedMenu operation Menu systemSource BasicAdvanced DhcpInformation Description of each menu Settings Color ModeTemperature ReferenceSearch TimerQuick Auto Color SpaceLanguage Auto PowerBlank Timer ProjectorClosed AudioMenu CaptionRemote Reset AllSecurity Control CodeMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Type number RLC-071Type number RLC-077 Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Light Status & Description IndicatorsPower events Lamp eventsTroubleshooting Cause RemedySpecifications Projector specificationsInput terminal RequirementsPJD5126/PJD5226/PJD5226w Dimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsCopyright information CopyrightDisclaimer Appendix IR control tableCode a Code B RJ45 response table RS232 command tableRS232/RJ45 command table Pin assignment for this two endReset Execute Front Table Horizontal Brightest Gain Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 2 pages 56.35 Kb

PJD5226, PJD6353, PJD6383S, PJD6683WS, PJD6223 specifications

The ViewSonic PJD6553W is a high-performance DLP projector designed to meet the needs of both educational environments and business presentations. With a resolution of 1280 x 800, this projector provides a widescreen aspect ratio of 16:10, making it suitable for displaying a variety of content, from PowerPoint presentations to HD videos.

One of the standout features of the PJD6553W is its brightness level, boasting 3,200 lumens. This high brightness ensures that images remain clear and vibrant even in well-lit rooms, allowing for flexible usage in various settings without the need for dimming lights.

The PJD6553W employs DLP technology, which is known for its reliability and consistent image quality. This technology helps in delivering sharp and crisp details, vital for conveying information effectively. Additionally, the projector features a high contrast ratio of 15,000:1, which enhances the depth and richness of colors, ensuring that presentations are not only informative but visually engaging.

Another significant aspect of the ViewSonic PJD6553W is its long lamp life, which can last up to 6,000 hours in Eco mode. This reduces the frequency of replacements, lowering maintenance costs and ensuring that users can focus on their presentations rather than on projector upkeep.

Connectivity options are extensive with the PJD6553W, including HDMI, VGA, and composite inputs, allowing for seamless integration with various devices such as laptops, tablets, and media players. The inclusion of an integrated speaker enhances the overall experience, providing audible support for presentations without the need for external speakers.

For added convenience, the PJD6553W also features a 1.1x optical zoom, which provides flexibility in projector placement and allows for adjustments without needing to physically move the projector. Its compact design and lightweight nature make it portable, suitable for both fixed installations and on-the-go presentations.

In summary, the ViewSonic PJD6553W is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, excellent connectivity options, long lamp life, and superior image quality make it an ideal choice for educators and business professionals seeking impactful visual presentations.