ViewSonic PJD6383, PJD6653W, PJD6353 Entering the password recall procedure, Changing the password

Entering the password recall procedure

1.	Press and hold AUTO on the projector or Auto	RECALL PASSWORD
	Sync on the remote control for 3 seconds. The
		Please write down the recall code,
	projector will display a coded number on the
		and contact ViewSonic
		Customer Center.
	screen.
2.	Write down the number and turn off your	Recall code:
		0 2 1 2
	projector.
3.	Seek help from the local service center to decode	MENU Exit

the number. You may be required to provide

proof of purchase documentation to verify that you are an authorized user of the projector.

Changing the password

1.Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings > Change Password menu.

2.Press MODE/ENTER on the projector or Enter on the remote control. The message 'INPUT CURRENT PASSWORD' is displayed.

3.Enter the old password.

•If the password is correct, another message 'INPUT NEW PASSWORD' is displayed.

•If the password is incorrect, the password error message is displayed lasting for three seconds, and the message 'INPUT CURRENT PASSWORD' is displayed for your retry. You can press MENU/EXIT on the projector or Exit on the remote control to cancel the change or try another password.

4.Enter a new password.

5.Confirm the new password by re-entering the new password.

6.You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started.

7.To leave the OSD menu, press MENU/EXIT on the projector or Exit on the remote control.

The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __ __

Keep this user manual in a safe place.

25