ViewSonic PJD6553W, PJD6653W, PJD6683W, PJD6353S Remote control code, Operating the Laser pointer

Page 14

10.Lock

Activates or deactivates panel key lock.

11.Aspect

Selects the display aspect ratio.

12.Magnify

Displays the zoom bar that magnifies or reduces the projected picture size.

13.Info

Displays the INFORMATION menu.

14.Freeze

Freezes the projected image.

15.Pattern

Displays embedded test pattern.

16.Blank

Hides the screen picture.

17.DynamicEco™

Decreases the power consumption of the lamp by up to 70%.

21.Volume keys (+, -)

Magnifies or reduces the volume level.

22.

Toggles the projector audio between on and off.

23.Color Mode

Selects an available picture setup mode.

24.Timer

Displays the presentation timer settings menu.

25.Laser

Emits visible laser pointer light for presentation purposes.

Operating the Laser pointer

The Laser Pointer is a presentation aid for professionals. It emits red colored light when you press it and the indicator lights up red.

It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes.

If the projector is resumed by using the Smart Restart feature, this function can be executed immediately.

18.Auto Sync

Automatically determines the best picture timings for the displayed image.

19.Exit

Goes back to previous OSD menu, exits and saves menu settings.

20.PgUp (Page Up)/PgDn (Page Down) Operates your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) when the mouse mode is activated.

The laser beam is visible. It is necessary to press and hold LASER for continuous output.

The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and keep this remote control out of the reach of children.

Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote control prior to using it.

Remote control code

The projector can be assigned to two different remote control codes, A or B. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector first before changing that for the remote control.

To switch the code for the projector, select A or B in the SYSTEM SETUP: Advanced >

Remote Control Code menu.!

9

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Rear/lower side Projector exterior viewFront/upper side Controls and functions ProjectorRemote control Remote control code Operating the Laser pointerSet the input signal to D-Sub / Comp , D-Sub / Comp or Hdmi Using the remote mouse controlRemote control effective range Replacing the remote control batteries Positioning your projector Choosing a locationProjection dimensions PJD5126/PJD5226 /PJD6223PJD6253 PJD6353/PJD6353s/PJD6383/PJD6383sPJD5226w/PJD6553w/PJD6653w/PJD6653ws PJD5226wPJD6553w PJD6653w/PJD6653ws/PJD6683w/PJD6683wsConnection PJD6683ws PJD5126/PJD5226 PJD5226wConnecting a monitor Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerBest video quality Connecting Video source devicesConnecting audio Better video qualityTo connect the projector to an Hdmi device Connecting an Hdmi deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceConnecting a composite Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorSystem Setup Basic Using the menusUse / to highlight the System Setup Basic menu System Setup AdvancedIf you forget the password Utilizing the password functionSetting a password Entering the password recall procedure Changing the passwordDisabling the password function Switching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratio PC input signals D-Sub / Comp /2 analog RGB Selecting a picture modePicture modes for different types of signals Optimizing the imageSetting the User 1/User 2 mode Using Screen ColorFine-tuning the image quality in user modes Go to the Picture Color Mode menuAdjusting Color Adjusting BrightnessAdjusting Contrast Adjusting TintColor Management About color temperaturesTo adjust the settings Setting the presentation timer To cancel the timer, perform the following stepsFreezing the image Hiding the imageLocking control keys Operating in a high altitude environmentCreating your own startup screen Controlling the projector through a LAN environment Configuring the LAN Control SettingsTo highlight LAN Control Settings and press MODE/ENTER on If you are in a Dhcp environmentControlling the projector through a web browser If you are in a non-DHCP environmentCategory Item Input Length Maximum Number Characters About Crestron e-Control You can press To reveal More buttonsIP ID Enabled User Password New Password Confirm Admin Password Crestron RoomViewShutting down the projector Using the projector in standby modePower Saving PJLink, SNMP, AMX and Xpanel formats supportedMenu operation Menu systemSource BasicAdvanced DhcpInformation Description of each menu Settings Color ModeTemperature ReferenceSearch TimerQuick Auto Color SpaceLanguage Auto PowerBlank Timer ProjectorClosed AudioMenu CaptionRemote Reset AllSecurity Control CodeMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageType number RLC-077 Replacing the lampType number RLC-071 Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Light Status & Description IndicatorsPower events Lamp eventsTroubleshooting Cause RemedySpecifications Projector specificationsPJD5126/PJD5226/PJD5226w Input terminalRequirements Dimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsDisclaimer Copyright informationCopyright Code a AppendixIR control table Code B RJ45 response table RS232 command tableRS232/RJ45 command table Pin assignment for this two endReset Execute Front Table Horizontal Brightest Gain Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 2 pages 56.35 Kb

PJD5226, PJD6353, PJD6383S, PJD6683WS, PJD6223 specifications

The ViewSonic PJD6553W is a high-performance DLP projector designed to meet the needs of both educational environments and business presentations. With a resolution of 1280 x 800, this projector provides a widescreen aspect ratio of 16:10, making it suitable for displaying a variety of content, from PowerPoint presentations to HD videos.

One of the standout features of the PJD6553W is its brightness level, boasting 3,200 lumens. This high brightness ensures that images remain clear and vibrant even in well-lit rooms, allowing for flexible usage in various settings without the need for dimming lights.

The PJD6553W employs DLP technology, which is known for its reliability and consistent image quality. This technology helps in delivering sharp and crisp details, vital for conveying information effectively. Additionally, the projector features a high contrast ratio of 15,000:1, which enhances the depth and richness of colors, ensuring that presentations are not only informative but visually engaging.

Another significant aspect of the ViewSonic PJD6553W is its long lamp life, which can last up to 6,000 hours in Eco mode. This reduces the frequency of replacements, lowering maintenance costs and ensuring that users can focus on their presentations rather than on projector upkeep.

Connectivity options are extensive with the PJD6553W, including HDMI, VGA, and composite inputs, allowing for seamless integration with various devices such as laptops, tablets, and media players. The inclusion of an integrated speaker enhances the overall experience, providing audible support for presentations without the need for external speakers.

For added convenience, the PJD6553W also features a 1.1x optical zoom, which provides flexibility in projector placement and allows for adjustments without needing to physically move the projector. Its compact design and lightweight nature make it portable, suitable for both fixed installations and on-the-go presentations.

In summary, the ViewSonic PJD6553W is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, excellent connectivity options, long lamp life, and superior image quality make it an ideal choice for educators and business professionals seeking impactful visual presentations.
Top Page Image Contents