ViewSonic PJD5226W, PJD6653W, PJD6553W, PJD6683W Timing of replacing the lamp, Status Message

Page 63

Timing of replacing the lamp

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.

CAUTION

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See "Indicators" on page 62 for details.

The following lamp warning displays will remind you to change the lamp.

Status

 

Message

Install a new lamp for optimal performance. If the

 

Notice

projector is normally run with Economic selected

 

Order Replacement Lamp

(See "Setting Lamp Mode as Economic" on page

 

57), you may continue to operate the projector

 

Lamp > ____ Hours

until the next hour lamp warning appears.

 

 

 

 

 

OK

 

 

 

 

A new lamp should be fitted to avoid the

 

 

 

Notice

 

inconvenience when the projector runs out of lamp

 

 

 

time.

 

Replace Lamp Soon

 

 

 

Lamp > ____ Hours

 

 

 

OK

 

 

 

 

 

 

 

 

 

It is strongly recommended that you replace the

 

Notice

lamp at this age. The lamp is a consumable item.

 

Replace Lamp Now

The lamp brightness diminishes with use. This is

 

normal lamp behavior. You can replace the lamp

 

Lamp > ____ Hours

whenever you notice that the brightness level has

 

Lamp usage time exceeded

significantly diminished. If the lamp is not

 

OK

replaced beforehand, it must be replaced when

 

 

 

 

you see this message.

 

 

 

The lamp MUST be replaced before the projector

 

Notice

will operate normally.

 

Lamp usage time exceeded

 

 

 

 

Replace lamp (refer to User Manual)

 

 

Then reset lamp timer

 

 

OK

 

 

 

 

58

Page 62 Page 64
Image 63
Page 62 Page 64
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Safety Instructions Important safety instructionsSafety instructions for ceiling mounting of the projector Introduction Projector featuresShipping contents Projector exterior view Front/upper sideRear/lower side Projector Controls and functionsRemote control Operating the Laser pointer Remote control codeUsing the remote mouse control Remote control effective rangeSet the input signal to D-Sub / Comp , D-Sub / Comp or Hdmi Replacing the remote control batteries Choosing a location Positioning your projectorPJD5126/PJD5226 /PJD6223 Projection dimensionsPJD6353/PJD6353s/PJD6383/PJD6383s PJD6253PJD5226w PJD5226w/PJD6553w/PJD6653w/PJD6653wsPJD6653w/PJD6653ws/PJD6683w/PJD6683ws PJD6553wPJD6683ws PJD5126/PJD5226 PJD5226w ConnectionTo connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer Connecting a monitorBetter video quality Connecting Video source devicesConnecting audio Best video qualityTo connect the projector to a Component Video source device Connecting an Hdmi deviceConnecting a Component Video source device To connect the projector to an Hdmi deviceTo connect the projector to a composite Video source device Connecting an S-Video source deviceConnecting a composite Video source device To connect the projector to an S-Video source deviceStarting up the projector OperationSystem Setup Advanced Using the menusUse / to highlight the System Setup Basic menu System Setup BasicUtilizing the password function Setting a passwordIf you forget the password Changing the password Entering the password recall procedureDisabling the password function Changing Color Space Switching input signalFine-tuning the image clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Magnifying and searching for detailsSelecting the aspect ratio About the aspect ratio Optimizing the image Selecting a picture modePicture modes for different types of signals PC input signals D-Sub / Comp /2 analog RGBGo to the Picture Color Mode menu Using Screen ColorFine-tuning the image quality in user modes Setting the User 1/User 2 modeAdjusting Tint Adjusting BrightnessAdjusting Contrast Adjusting ColorAbout color temperatures To adjust the settingsColor Management To cancel the timer, perform the following steps Setting the presentation timerOperating in a high altitude environment Hiding the imageLocking control keys Freezing the imageCreating your own startup screen If you are in a Dhcp environment Configuring the LAN Control SettingsTo highlight LAN Control Settings and press MODE/ENTER on Controlling the projector through a LAN environmentIf you are in a non-DHCP environment Controlling the projector through a web browserCategory Item Input Length Maximum Number Characters You can press To reveal More buttons About Crestron e-ControlIP ID Crestron RoomView Enabled User Password New Password Confirm Admin PasswordPJLink, SNMP, AMX and Xpanel formats supported Using the projector in standby modePower Saving Shutting down the projectorMenu system Menu operationBasic SourceDhcp AdvancedInformation Description of each menu Reference Color ModeTemperature SettingsColor Space TimerQuick Auto SearchProjector Auto PowerBlank Timer LanguageCaption AudioMenu ClosedControl Code Reset AllSecurity RemoteCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp Mode as EconomicSetting Auto Power Off Lamp informationStatus Message Timing of replacing the lampReplacing the lamp Type number RLC-071Type number RLC-077 Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Lamp events IndicatorsPower events Light Status & DescriptionCause Remedy TroubleshootingProjector specifications SpecificationsInput terminal RequirementsPJD5126/PJD5226/PJD5226w Ceiling mount installation DimensionsSupported timing for PC input Timing chartSupported timing for Video and S-Video inputs Supported timing for Component-YPbPrinputCopyright information CopyrightDisclaimer Appendix IR control tableCode a Code B Pin assignment for this two end RS232 command tableRS232/RJ45 command table RJ45 response tableReset Execute Front Table Horizontal Brightest Gain Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 2 pages 56.35 Kb

PJD5226, PJD6353, PJD6383S, PJD6683WS, PJD6223 specifications

The ViewSonic PJD6553W is a high-performance DLP projector designed to meet the needs of both educational environments and business presentations. With a resolution of 1280 x 800, this projector provides a widescreen aspect ratio of 16:10, making it suitable for displaying a variety of content, from PowerPoint presentations to HD videos.

One of the standout features of the PJD6553W is its brightness level, boasting 3,200 lumens. This high brightness ensures that images remain clear and vibrant even in well-lit rooms, allowing for flexible usage in various settings without the need for dimming lights.

The PJD6553W employs DLP technology, which is known for its reliability and consistent image quality. This technology helps in delivering sharp and crisp details, vital for conveying information effectively. Additionally, the projector features a high contrast ratio of 15,000:1, which enhances the depth and richness of colors, ensuring that presentations are not only informative but visually engaging.

Another significant aspect of the ViewSonic PJD6553W is its long lamp life, which can last up to 6,000 hours in Eco mode. This reduces the frequency of replacements, lowering maintenance costs and ensuring that users can focus on their presentations rather than on projector upkeep.

Connectivity options are extensive with the PJD6553W, including HDMI, VGA, and composite inputs, allowing for seamless integration with various devices such as laptops, tablets, and media players. The inclusion of an integrated speaker enhances the overall experience, providing audible support for presentations without the need for external speakers.

For added convenience, the PJD6553W also features a 1.1x optical zoom, which provides flexibility in projector placement and allows for adjustments without needing to physically move the projector. Its compact design and lightweight nature make it portable, suitable for both fixed installations and on-the-go presentations.

In summary, the ViewSonic PJD6553W is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, excellent connectivity options, long lamp life, and superior image quality make it an ideal choice for educators and business professionals seeking impactful visual presentations.
Top Page Image Contents