ViewSonic PJD6683WS, PJD6653W, PJD6553W, PJD6353S Switching input signal, Changing Color Space

Page 32

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time.

Be sure the Quick Auto Search function in the SOURCE menu is On if you want the projector to automatically search for the signals.

You can also manually select the desired signal by pressing one of the source selection keys on the remote control, or cycle through the available input signals.

1.Press SOURCE on the projector or remote control. A source selection bar is displayed.

2.Press / until your desired signal is selected and press MODE/ENTER on the projector or Enter on the remote control. Once detected, the selected source information will be displayed on the screen for seconds. If there are multiple devices connected to the projector, repeat steps 1-2 to search for another signal.

• The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies).

The input signal type effects the options available for the Color Mode. See "Selecting a picture mode" on page 32 for details.

Please see "Projector specifications" on page 64 for the native display resolution of this projector. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 30 for details.

PJD5126/PJD5226/PJD5226w

D-Sub / Comp. 1

D-Sub / Comp. 2

Video

S-Video

PJD6223/PJD6253/PJD6353/

PJD6353s/PJD6383/PJD6383s/

PJD6553w/PJD6653w/PJD6653ws

PJD6683w/PJD6683ws

D-Sub / Comp. 1

D-Sub / Comp. 2

HDMI

Video

S-Video

Changing Color Space

This function is only available for the PJD6223/PJD6253/PJD6353/PJD6353s/PJD6383/PJD6553w/ PJD6383s/PJD6653w/PJD6653ws/PJD6683w/PJD6683ws series.

In the unlikely event that you connect the projector to a DVD player via the projector’s HDMI input and the projected picture displays wrong colors, please change the color space to YUV.

To do this:

1.Open the OSD menu and go to the SOURCE menu.

2.Press to highlight Color Space Conversion and press / to select a suitable color space.

This function is only available when the HDMI-input port is in use.

27

Image 32
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Rear/lower side Projector exterior viewFront/upper side Controls and functions ProjectorRemote control Remote control code Operating the Laser pointerSet the input signal to D-Sub / Comp , D-Sub / Comp or Hdmi Using the remote mouse controlRemote control effective range Replacing the remote control batteries Positioning your projector Choosing a locationProjection dimensions PJD5126/PJD5226 /PJD6223PJD6253 PJD6353/PJD6353s/PJD6383/PJD6383sPJD5226w/PJD6553w/PJD6653w/PJD6653ws PJD5226wPJD6553w PJD6653w/PJD6653ws/PJD6683w/PJD6683wsConnection PJD6683ws PJD5126/PJD5226 PJD5226wConnecting a computer or monitor Connecting a computerConnecting a monitor To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioBest video quality Better video qualityConnecting an Hdmi device Connecting a Component Video source deviceTo connect the projector to an Hdmi device To connect the projector to a Component Video source deviceConnecting an S-Video source device Connecting a composite Video source deviceTo connect the projector to an S-Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorUsing the menus Use / to highlight the System Setup Basic menuSystem Setup Basic System Setup AdvancedIf you forget the password Utilizing the password functionSetting a password Entering the password recall procedure Changing the passwordDisabling the password function Switching input signal Changing Color SpaceAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratio Selecting a picture mode Picture modes for different types of signalsPC input signals D-Sub / Comp /2 analog RGB Optimizing the imageUsing Screen Color Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Go to the Picture Color Mode menuAdjusting Brightness Adjusting ContrastAdjusting Color Adjusting TintColor Management About color temperaturesTo adjust the settings Setting the presentation timer To cancel the timer, perform the following stepsHiding the image Locking control keysFreezing the image Operating in a high altitude environmentCreating your own startup screen Configuring the LAN Control Settings To highlight LAN Control Settings and press MODE/ENTER onControlling the projector through a LAN environment If you are in a Dhcp environmentControlling the projector through a web browser If you are in a non-DHCP environmentCategory Item Input Length Maximum Number Characters About Crestron e-Control You can press To reveal More buttonsIP ID Enabled User Password New Password Confirm Admin Password Crestron RoomViewUsing the projector in standby mode Power SavingShutting down the projector PJLink, SNMP, AMX and Xpanel formats supportedMenu operation Menu systemSource BasicAdvanced DhcpInformation Description of each menu Color Mode TemperatureSettings ReferenceTimer Quick AutoSearch Color SpaceAuto Power Blank TimerLanguage ProjectorAudio MenuClosed CaptionReset All SecurityRemote Control CodeMaintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageType number RLC-077 Replacing the lampType number RLC-071 Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Indicators Power eventsLight Status & Description Lamp eventsTroubleshooting Cause RemedySpecifications Projector specificationsPJD5126/PJD5226/PJD5226w Input terminalRequirements Dimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsDisclaimer Copyright informationCopyright Code a AppendixIR control table Code B RS232 command table RS232/RJ45 command tableRJ45 response table Pin assignment for this two endReset Execute Front Table Horizontal Brightest Gain Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 2 pages 56.35 Kb

PJD5226, PJD6353, PJD6383S, PJD6683WS, PJD6223 specifications

The ViewSonic PJD6553W is a high-performance DLP projector designed to meet the needs of both educational environments and business presentations. With a resolution of 1280 x 800, this projector provides a widescreen aspect ratio of 16:10, making it suitable for displaying a variety of content, from PowerPoint presentations to HD videos.

One of the standout features of the PJD6553W is its brightness level, boasting 3,200 lumens. This high brightness ensures that images remain clear and vibrant even in well-lit rooms, allowing for flexible usage in various settings without the need for dimming lights.

The PJD6553W employs DLP technology, which is known for its reliability and consistent image quality. This technology helps in delivering sharp and crisp details, vital for conveying information effectively. Additionally, the projector features a high contrast ratio of 15,000:1, which enhances the depth and richness of colors, ensuring that presentations are not only informative but visually engaging.

Another significant aspect of the ViewSonic PJD6553W is its long lamp life, which can last up to 6,000 hours in Eco mode. This reduces the frequency of replacements, lowering maintenance costs and ensuring that users can focus on their presentations rather than on projector upkeep.

Connectivity options are extensive with the PJD6553W, including HDMI, VGA, and composite inputs, allowing for seamless integration with various devices such as laptops, tablets, and media players. The inclusion of an integrated speaker enhances the overall experience, providing audible support for presentations without the need for external speakers.

For added convenience, the PJD6553W also features a 1.1x optical zoom, which provides flexibility in projector placement and allows for adjustments without needing to physically move the projector. Its compact design and lightweight nature make it portable, suitable for both fixed installations and on-the-go presentations.

In summary, the ViewSonic PJD6553W is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, excellent connectivity options, long lamp life, and superior image quality make it an ideal choice for educators and business professionals seeking impactful visual presentations.