Network configuration
[4] Network configuration
When you connect a projector to a network, the network number of projector must be the same as the network you intend to connect. You should configure projector’s network first. Make sure that the projector is connected to the network correctly. There are 2 ways to configure the network, by using the projector’s menu [A], or by using the computer [B]. Refer to the chart below and use the method you prefer.
Procedure of Connecting the projector to the network
|
| Configure the network with the | |
| A | ||
| projector | p.16 | |
|
|
|
|
Turn the projector on and display the network setting menu on the screen.
Configure the network through the projector's menu.
|
|
|
|
|
|
|
|
|
|
|
|
|
| B | Configure the network with computer | p.18 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Temporarily set up the computer's |
|
| Please see further |
|
| |||||
|
|
| informatin on pages |
|
| ||||||
| network with the default network |
|
|
|
|
| |||||
| number of the Network Board. |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| Example of projector's configuration |
|
| |
|
|
|
|
|
|
|
| IP Address : 192.168.0.5 |
|
| |
|
|
|
|
|
|
|
| Subnet Mask : 255.255.255.0 |
|
| |
|
| Restart the Computer, if required |
|
| Default Gateway : (blank) |
|
| ||||
|
|
|
| DNS : (blank) |
|
| |||||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
Example of projector's configuration
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
Restart the Network Board
Please see further informatin on pages 16-17.
Using the web browser and login to the setting page of the Network Board by accessing the default IP address.
Change the network address you want to connect to the existing network through the setting menu on the browser.
Restart the Network Board
Please see further informatin on pages
Default Network Address of the Network
Board
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Example of projector's configuration IP Address : 192.168.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.1.1 DNS : 0.0.0.0
Reset to the computer's original network configuration.
Completing the network configuration. Perform the basic setting and operation of the projector by using the web browser. Please see chapter "Basic Setting" on page 25 for further information.
Network Board
OWNER’S MANUAL
ENGLISH
15