Eiki MD13NET owner manual Getting the current time, Cancel the timer

Page 48

Controlling the Projector

Getting the current time

The displayed time is the value set when the setting page was displayed. This time value is not updated automatically. To update the display time press the Refresh but- ton.

Notes on timer setting

Up to 10 timer events can be registered. Timer events always operate according to the next valid event depending on the projector's power status. In the example below, event 3 turns on the projector so next event 4 (also turning on projector) will not be effective because the projector is already turned on. Similarly, when the projector is turned off by event 5, event 6 OFF will not be effective in turning it off again. But these secondary events (event 4 and event 6) will become effective if a person turns off the projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6).

 

 

Invalid event

Invalid event

Projector Power

ON

ON

 

Event 1

ON

 

 

Event 2

 

OFF

 

Event 3

 

ON

 

Event 4

 

ON

 

Event 5

 

 

OFF

Event 6

 

 

OFF

Time

 

 

 

When the timer events are set at the same time, the last event set will override the previous events. For example, if there is an event like “On at 8:00 everyday” and then new event is set like “Off at 8:00 everyday”, only the last setting event is effective.

When the timer event ON occurs during cooling down period, this is invalid event because the projector cannot be turned on during this cooling down period.

Cancel the timer

To cancel the timer event, check the timer event you want to delete and then press the Delete button.

The timer operates by using the clock function provided in this product. Before setting the timer, please confirm that the current date and time are set correctly. Timer and clock func- tions are functioning using a lithium battery provided in this product. When the battery runs down, the clock and timer functions will not operate correctly. Consult your local dealer for the replacement of battery. The replacement must be carried out by a qualified service per- sonnel.

48

Image 48
Contents Installation and Operation of the Network Board Network BoardCompliances Federal Communication Commission NoticeTrademark Expression/Abbreviation Use of this manualContents Use of Serial Port Features Power onWeb Management function Mail Alert functionAutomatic On/Off using Timer function Multi-control functionControl port ready for external equipment via network Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Secure the board with two screws suppliedConnection of LAN cable Confirmation of network setting menu Network Confirmation of password setting menu DisplayConfirmation of network menu activity Turn on the projector and display the menu on the screenNetwork configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network boardConfigure the network with the computer English Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Basic Setting and Operation Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the Graphic Mode displayMain setting page in the Text Mode display Initial Settings Language SettingPassword Setting Date/Time SettingConfigure the network Name the projectorMail Setting Smtp Server*1Registering and deleting E-mail addresses Condition selection for sending alert message Examples Type and contents of alert mail Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Items DescriptionControl the projector InputPC Adjustment PictureSave a Set Load a SetSystem Adjustment Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input Image Adjustment Save a image adjustment value Load a image modeScreen Adjustment Sound AdjustmentSetting About Lamp Counter reset How to set the Timer Check the Timer eventsCancel the timer Getting the current timeService AreaSave Actual Adjustment Adjust and set the controlsName the current setting Save the current settingCheck the Save items Load a control set Control the projectors menu ProjectorMake a memo Controlling the Multi-Projectors Multi-Control Register IP address and projec Tor name Check IP address and projec Tor nameExclude/Add/Delete a projec Tor StatusLoad and apply the setting value ControlControl multi-projectors at the same time Use of Serial Port Serial Port setting Use of Serial PortUse of Serial Port Control Examples ExampleEnglish Use of Telnet ControlUse of telnet Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterWeb browser setting Active Script/JavaScript enableProxy setting Setting examples OS/Browsers Internet Explorer ActiveScript settingWindows 95/98 Proxy setting Using proxy serverNetscape Navigator JavaScript Setting Proxy setting Mac OS Proxy setting Netscape Navigator JavaScript Setting Proxy setting Product specification TCP/IPPort Specification LAN port specificationSerial port specification FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network Board What is the MAC address assigned to the Network Board? What are the rules for IP address assignment?English