Eiki MD13NET owner manual Why am I not receiving E-mail alert messages?

Page 88

Appendix

QWhy am I not receiving E-mail alert messages?

AMake sure that the registered E-mail address and SMTP server address are cor- rect. If the SMTP server is located in your LAN (Local Area network), the

address should be set to the SMTP server in your LAN. The SMTP server locat- ed outside of your LAN may not be available for security reason. For further information please contact your network administrator. (p.32)

It may be required for the authentication depending on the SMTP server. This product does not support this kind of SMTP server.

Others

QCan I develop a driver to control external serial equipment?

AThis product does not provide any driver software. To control the external equipment connected to the extra serial port, it should be required to clarify the

commands and communication condition defined by each equipment. If they are clarified, it can be controlled by using the Telnet application installed on your computer. Please see chapter “Use of telnet” on page 66.

QCan I control the projector by using the telnet application?

APossible. Please refer to the chapter “Control the projector with telnet“ on page 68.

88

Image 88

Contents Installation and Operation of the Network Board Network BoardFederal Communication Commission Notice CompliancesTrademark Expression/Abbreviation Use of this manualContents Use of Serial Port Features Power onWeb Management function Mail Alert functionMulti-control function Automatic On/Off using Timer functionControl port ready for external equipment via network Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Secure the board with two screws suppliedConnection of LAN cable Confirmation of network setting menu Network Confirmation of password setting menu DisplayConfirmation of network menu activity Turn on the projector and display the menu on the screenNetwork configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network boardConfigure the network with the computer English Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Login the setting page of the projector Basic Setting and OperationEnter the IP address Display of main setting Main setting page in the Graphic Mode displayMain setting page in the Text Mode display Initial Settings Language SettingPassword Setting Date/Time SettingConfigure the network Name the projectorSmtp Server*1 Mail SettingRegistering and deleting E-mail addresses Condition selection for sending alert message Examples Type and contents of alert mail Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Items DescriptionControl the projector InputPC Adjustment PictureSave a Set Load a SetAvailable selection when the VIDEO/S-VIDEO input System AdjustmentAvailable selection when the Y, Cb/Pb, Cr/Pr input Image Adjustment Save a image adjustment value Load a image modeScreen Adjustment Sound AdjustmentSetting About Lamp Counter reset How to set the Timer Check the Timer eventsCancel the timer Getting the current timeService AreaSave Actual Adjustment Adjust and set the controlsName the current setting Save the current settingCheck the Save items Load a control set Control the projectors menu ProjectorMake a memo Controlling the Multi-Projectors Multi-Control Register IP address and projec Tor name Check IP address and projec Tor nameExclude/Add/Delete a projec Tor StatusLoad and apply the setting value ControlControl multi-projectors at the same time Use of Serial Port Serial Port setting Use of Serial PortUse of Serial Port Control Examples ExampleEnglish Use of Telnet ControlUse of telnet Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterActive Script/JavaScript enable Web browser settingProxy setting Internet Explorer ActiveScript setting Setting examples OS/BrowsersWindows 95/98 Proxy setting Using proxy serverNetscape Navigator JavaScript Setting Proxy setting Mac OS Proxy setting Netscape Navigator JavaScript Setting Proxy setting Product specification TCP/IPLAN port specification Port SpecificationSerial port specification FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network Board What is the MAC address assigned to the Network Board? What are the rules for IP address assignment?English