Installation
Configure the network of computer
When you use the projector through the network, the IP address of the pro- jector must be the same IP network number of the existing network. Also it is required to use the same IP network number of the computer to set up the projec-
tor. In the network included with the gateway (router), it must be used with the IP network number specified by the gateway (router).
Configure the computer's network by following steps:
Windows 98/95/Me
This example explains how to set the following network address.
IP Address | : 192.168.0.5 |
Subnet Mask | : 255.255.255.0 |
Gateway Address : 192.168.100.1
1 Select the Control Panel menu from [Start] - [Setting] menu.
2 Double click the Network icon on the control panel window.
3 Select the TCP/IP*1 item on the “Current Network Component” column on the “Network configuration” tab on the “Network” dialog window, and then press the Properties button.
4 Click the IP Address tab, and then select the Specified IP address. Enter the IP Address*2 and Subnet Mask.
5 Click the Gateway tab and enter the Gateway Address then press the Add button. Please make sure that the entered gateway address appears on the “Installed Gateway” column.
✐This setting is not needed if the network does not provide the gateway (router).
6 Click the OK button, the setting window will be closed and restart the computer.
20