Eiki MD13NET owner manual Operating Environment

Page 8

Preparation

Operating Environment

To perform the management and setting up the projector using this product, the envi- ronment described below is required.

Operating System

Windows 95 / Windows 98 / Windows 2000 / Windows Me / Windows NT / Windows XP

Mac OS 8.0 or later

Network

Network must handle Ethernet correctly and accept TCP/IP protocol.

Computer

The computer must provide a 10Base-T or 100Base-TX network card.

Web browser application*

Microsoft Internet Explorer version 5.0 or later

Netscape Navigator version 4.7 or later

*Use to control and set up the projector. The layout of pages in the browser may slightly differ from each type of application or operating system you use.

Internet mail application*

Microsoft Outlook

Microsoft OutlookExpress

Netscape Mail

*Required the internet e-mail application software to receive an e-mail alert sent from this product. If you do not use the function E-mail Alert, this application is not required.

The limitation*1 of connection between this product and Hub or

Computer

Suitable LAN cables are limited by length and type as follows;

Connection

Type of usable LAN cable

Maximum length

 

 

 

Network Board - Hub

UTP Straight Cable with category 3 or 5 *2

100m

Network Board - Computer

UTP Cross Cable with category 3 or 5*2

100m

 

 

 

*1 There may be other limitations depending on your network environment or LAN specifica- tion. Please consult your network administrator for further details.

*2 Category of LAN cable indicates the cable quality. Normally, cable with category 3 or 5 is used for 10Base-T network and cable with category 5 is used for 100Base-TX network.

8

Image 8
Contents Installation and Operation of the Network Board Network BoardTrademark CompliancesFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Use of Serial Port Features Power onWeb Management function Mail Alert functionControl port ready for external equipment via network Automatic On/Off using Timer functionMulti-control function Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Secure the board with two screws suppliedConnection of LAN cable Confirmation of network setting menu Network Confirmation of password setting menu DisplayConfirmation of network menu activity Turn on the projector and display the menu on the screenNetwork configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network boardConfigure the network with the computer English Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Enter the IP address Basic Setting and OperationLogin the setting page of the projector Display of main setting Main setting page in the Graphic Mode displayMain setting page in the Text Mode display Initial Settings Language SettingPassword Setting Date/Time SettingConfigure the network Name the projectorRegistering and deleting E-mail addresses Mail SettingSmtp Server*1 Condition selection for sending alert message Examples Type and contents of alert mail Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Items DescriptionControl the projector InputPC Adjustment PictureSave a Set Load a SetAvailable selection when the Y, Cb/Pb, Cr/Pr input System AdjustmentAvailable selection when the VIDEO/S-VIDEO input Image Adjustment Save a image adjustment value Load a image modeScreen Adjustment Sound AdjustmentSetting About Lamp Counter reset How to set the Timer Check the Timer eventsCancel the timer Getting the current timeService AreaSave Actual Adjustment Adjust and set the controlsName the current setting Save the current settingCheck the Save items Load a control set Control the projectors menu ProjectorMake a memo Controlling the Multi-Projectors Multi-Control Register IP address and projec Tor name Check IP address and projec Tor nameExclude/Add/Delete a projec Tor StatusLoad and apply the setting value ControlControl multi-projectors at the same time Use of Serial Port Serial Port setting Use of Serial PortUse of Serial Port Control Examples ExampleEnglish Use of Telnet ControlUse of telnet Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterProxy setting Web browser settingActive Script/JavaScript enable Windows 95/98 Setting examples OS/BrowsersInternet Explorer ActiveScript setting Proxy setting Using proxy serverNetscape Navigator JavaScript Setting Proxy setting Mac OS Proxy setting Netscape Navigator JavaScript Setting Proxy setting Product specification TCP/IPSerial port specification Port SpecificationLAN port specification FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network Board What is the MAC address assigned to the Network Board? What are the rules for IP address assignment?English