Stack Mode

C H A P T E R 3 Configure the module and connect the cables

Cabling to a Matrix Module in a group of switches

The 1000Base Module is installed in a different switch from the Ma- trix Module, so the cabling process is in two parts; the switch contain- ing the 1000Base Module must be connected to the group, then the high-speed link between this group and another group or device is es- tablished.

1Plug the Stacking Cable (Intel Order Code: ES500SC) into the Stack Interface Module connector on the 1000Base Module, and secure it using the latches on the connector.

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX

Stack Interface Module

1717

2Plug the other end of the Stacking Cable into the Matrix Mod- ule, and secure it using the latches on the connector.

3Plug a second Stacking Cable into the 1000Base-SX/1000Base- LX SIM connector on the 1000Base Module, and secure it using the latches on the connector.

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX

Stack Interface Module

1718

4Plug the other end of the Stacking Cable in to the Matrix Mod- ule, and secure it using the latches on the connector.