Intel 1000LX, 1000SX manual A P T E R 3 Configure the module and connect the cables

C H A P T E R 3 Configure the module and connect the cables

3Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch (for example, both modules in Slot A), and secure it using the latches on the connector.

4The Stack Interface Module in the other slot on this switch must be plugged into the same port number in the other Matrix Mod- ule (for example, both modules in slot B), and secured using the latches on the connector.

5Plug a second Stacking Cable into the 1000Base-SX/1000Base- LX SIM connector on the 1000Base Module, and secure it using the latches on the connector.

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX Stack Interface Module

1718

6Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch (both modules in Slot A), and secure it using the latches on the con- nector.

14