Intel 1000LX, 1000SX manual Cabling to a Matrix

C H A P T E R 3 Configure the module and connect the cables

Cabling to a Matrix	To accomplish successful link aggregation, the modules must be in-
Module	stalled on the same side of separate switches (for example, both mod-
	ules in Slot A).
	Note The 1000Base-SX/1000Base-LX SIM connectors on the
	1000Base Modules must be connected to ports 2 and 3 on
	the Matrix Module for link aggregation to work.
	1 Connect the Stack Interface Module port on the 1000Base Mod-
	ule to either ports 1, 4, 5, or 6. This connects the switch to the
	stack.
	2 Plug a second Stacking Cable into the 1000Base-SX/1000Base-
	LX SIM connector on the 1000Base Module, and secure it
	using the latches on the connector.
		1000SX Module for 500 Series Switches
		CLASS 1 LASER PRODUCT
	1000Base-SX	Stack Interface Module
		1718

3Plug the other end of the Stacking Cable into either port 2 or 3 on the Matrix Module.

16