Intel 1000LX manual Introduction, Front panel of the 1000SX Module is shown below

C H A P T E R 2 1000SX and 1000LX Modules

Introduction

Two modes	This module operates in two modes.
	•	Stack mode (default setting):
		Used when the switch containing this module is connected to a
		group of switches (or stack) via a Matrix Module. The two Stack
		Interface Module (SIM) connectors enable the module to be inte-
		grated into the group of switches (even a stack with redun-
		dancy). The fiber optic SC connector provides the high-speed
		link between the group of switches (or stack) and another stack
		or device.
	•	Stand-alone mode:
		Used to provide a high-speed link between the switch and
		another device via the fiber optic SC connector.
Installing the module	To install the module, follow the instructions in Chapter 1.
View of the 1000SX front	The front panel of the 1000SX Module is shown below:
panel

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX Stack Interface Module

1711

View of the 1000LX front panel

The front panel of the 1000LX Module is shown below:

1000LX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-LX Stack Interface Module

1744

6