C H A P T E R 3 Cable the module
4Repeat steps 1 and 2 for the second 1000SX Advanced Module. Plug the other end of the Stacking Cable into port 2 on the Matrix Module.
4 | 5 | 6 |
|
|
|
| Module |
|
|
| Status |
| Matrix Module for 500 Series Switches |
| |
|
|
| Link |
|
|
| Status |
1 | 2 | 3 | Internal Port |
1000SX Advanced Module for 500 Series Switches | |
Stack Interface Module |
1000SX Advanced Module for 500 Series Switches | |
Stack Interface Module |
Server
5050
5Plug the SC connectors on the fiber optic cables into the RX and TX sockets, and connect the other end of the cables to a device or group of switches.
6Check the LEDs on the 1000SX Advanced Modules to verify the links. For more information on LEDs, see Chapter 2.
18