C H A P T E R 2 Getting to know the Module
Two modes of operation
This module operates in two modes.
•Stack mode (default setting):
Used when the switch containing this module is connected to a group of switches (or stack) via a Matrix Module. The two Stack Interface Module (SIM) connectors enable the module to be inte- grated into the group of switches (even a stack with redundancy). The fiber optic SC connector provides the
•
Used to provide a
View of the 1000SX Advanced front panel
The front panel of the 1000SX Advanced Module is shown below:
1000SX Advanced Module for 500 Series Switches
CLASS 1 LASER PRODUCT
|
|
|
|
|
|
|
|
|
| Stack Interface Module | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TX RX
5001
Installing the module
General Installation
General installation instructions are described in Chapter 1.
Installation restrictions
In a stack without redundancy, this module must not be installed in a switch containing a Stack Interface Module, a 155 ATM Module, or an- other 1000Base Module. In certain circumstances, this module can be installed in the same switch as a Matrix Module. These circumstances are described in the Matrix Module User Guide. The latest version is available at:
http://intel.com/support/express/switches/500/
6