Intel 1000SX manual A P T E R 4 Configure the module

Page 28

C H A P T E R 4 Configure the module

3Select the VLAN to be mapped and type in the 802.1Q VLAN ID the desired Priority value. (If no priority value is entered, the default value 0 is assigned automatically.)

Note if nothing is entered in the VLAN ID field, no mapping occurs.

4Click Assign to allocate a VLAN ID and priority value settings to the VLAN.

5Click Close to apply the mapping(s).

25

Image 28

Contents For1000SX500SeriesAdvancedSwitchesModule 1000SX Advanced Module for 500 Series Switches User GuideFirst edition October Installing the module Quick StartTurn off the switch Turn on the switch 3101 Getting to know the Module IntroductionInstalling the module Front panel of the 1000SX Advanced Module is shown belowIeee 802.1 Q VLANs via this module Proprietary 500 series VLANs VLANsModule LEDs A P T E R 2 Getting to know the Module Cable the module Cabling the moduleStand-alone Mode Stack Mode Stacking Cable Connected to Matrix Module Primary Secondary Combine bandwidth on two modules Cabling to a Matrix Module Server Configure the module Configuring the module Combining port bandwidth of two modules A P T E R 4 Configure the module Map VLANs to Ieee 802.1 Q VLANs Click 802.1Q Map A P T E R 4 Configure the module A P T E R 4 Configure the module Specifications Connector Fiber type Modal bandwidth @ 850nm62.5 ∝m MMF 50 ∝m MMFPerformance specifications are A P T E R 5 Specifications Limited Hardware Warranty See RMA information under Limited Limited Hardware Warranty Europe only Returning a Defective Product RMA Federal Communications Commission FCC Statement TranslationManufacturer Declaration Avertissement Avvertenza P E N D I X a P E N D I X a Customer Support Technicians Automated SupportNorth America only 916 Country Number Language

Related manuals

Manual 18 pages 60.84 Kb

Manual 30 pages 17.35 Kb