Intel ERP2U manual Turn On/Off Timing, Recommended Description

Page 22

 

 

 

 

 

 

SSI

 

 

 

 

ERP2U Power Supply Design Guide, V1.0

 

 

Table 19: Turn On/Off Timing

 

 

 

 

 

Item

Description

MIN

 

MAX

UNITS

 

 

Tsb_on_delay

Delay from AC being applied to 5 VSB being

 

 

1500

ms

 

 

within regulation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T ac_on_delay

Delay from AC being applied to all output voltages

 

 

2500

ms

 

 

being within regulation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tvout_holdup

Time all output voltages stay within regulation

18

 

 

ms

 

 

after loss of AC.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tpwok_holdup

Delay from loss of AC to deassertion of PWOK.

17

 

 

ms

 

 

 

 

 

 

 

 

 

Tpson_on_delay

Delay from PSON# active to output voltages within

5

 

400

ms

 

 

regulation limits.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T pson_pwok

Delay from PSON# deactive to PWOK being

 

 

50

ms

 

 

deasserted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tpwok_on

Delay from output voltages within regulation limits

200

 

1000

ms

 

 

to PWOK asserted at turn on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T pwok_off

Delay from PWOK deasserted to output voltages

1

 

 

ms

 

 

(3.3 V, 5 V, 12 V, -12 V) dropping out of regulation

 

 

 

 

 

 

 

limits.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tpwok_low

Duration of PWOK being in the deasserted state

100

 

 

ms

 

 

during an off/on cycle using AC or the PSON#

 

 

 

 

 

 

 

signal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tsb_vout

Delay from 5 VSB being in regulation to O/Ps

50

 

1000

ms

 

 

being in regulation at AC turn on.

 

 

 

 

 

 

 

 

 

 

 

 

 

STATUS

Recommended

Item

Description

MIN

MAX

UNITS

 

Tvout_holdup

Time all output voltages stay within regulation

21

 

ms

 

 

after loss of AC.

 

 

 

 

 

 

 

 

 

 

Tpwok_holdup

Delay from loss of AC to deassertion of PWOK.

20

 

ms

 

 

 

 

 

 

 

Tsb_holdup

Time 5VSB output voltage stays within regulation

70

 

ms

 

after loss of AC.

 

 

 

 

 

 

 

 

 

 

- 22 -

Image 22
Contents SSI Disclaimer Contents Tables Agency RequirementsPurpose Conceptual OverviewDefinitions/Terms/Acronyms RequiredMechanical Overview Required OptionalOptional Optional Chassis Mounting FeaturesAirflow Requirements RecommendedAC Input Requirements Temperature RequirementsAC Inlet Connector Redundant AC InletsEfficiency AC Input Voltage SpecificationOutput Minimum Power Efficiency AC Input RatingAC Line Fuse AC Line DropoutAC Inrush AC Line Sag Transient Performance AC Line Transient SpecificationAC Line Fast Transient Specification AC Line Surge Transient PerformanceRequired Baseboard power connector DC Output SpecificationOutput Connectors Optional Processor Power ConnectorPeripheral Power Connectors Required Peripheral Power ConnectorsRequired Floppy Power Connector P9 Floppy Power ConnectorGrounding Optional Server Signal ConnectorServer Signal Connector Remote SenseVoltage Minimum Continuous Maximum Continuous Peak Output Power/Currents350 W Load Ratings 480 W Load RatingsStandby Outputs Voltage RegulationVoltage Regulation Limits Ripple / Noise Dynamic LoadingCapacitive Loading Transient Load RequirementsRipple and Noise RedundancyHot Swap Requirements +3.3 +12 +5 VSBSSI Output Voltage Timing Timing RequirementsDescription Turn On/Off Timing Recommended DescriptionTurn On/Off Timing 240VA Protection Protection CircuitsCurrent Limit Over Current ProtectionOver Voltage Limits Over Temperature ProtectionOver Voltage Protection Output VoltagePwok delay Control and Indicator FunctionsPson # Signal Characteristic Signal Type PSON#Pwok Power OK Pwok Signal CharacteristicsModule FRU Data Module FRU Data Format Field Replacement Unit FRU SignalsSMBus Communication Product Info AreaMultiRecord Area Field Name PS Info Field Information DefinitionLED Indicators LED IndicatorsPower Supply LEDs Mtbf 10Agency Requirements