Putting batteries
WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
•Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not use a new battery with used one.
•Make sure the plus and minus terminals are correctly aligned when loading a battery.
•Keep a battery away from children and pets.
•Do not recharge, short circuit, solder or disassemble a battery.
•Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.
•Do not give the battery a physical impact.
•If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the flower adheres your body or clothes, rinse well with water immediately.
•Obey the local laws on disposing a battery.
To use the remote control, please load the batteries. Whenever the remote control starts to malfunction, replace the batteries. If you won’t use the remote control for an extended period, remove the batteries from the remote control and store them in a safe place.
1.Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2.Take old batteries out and/or put new batteries in.
When putting in batteries, align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.
3.Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into place.
ViewSonic PJ452 | 7 |