ViewSonic PJ452 manual Power on/off, Turning on the power

Page 20

Power on/off

Turning on the power

WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector.

NOTE • Turn the power on in right order. Please power on the projector before the connected devices.

	POWER indicator
STANDBY/ON
button	Power switch
	Power switch

1.Make sure that the power cord is firmly and correctly connected to the projector and outlet.

2.Open the lens cover, and set the power switch to the ON position.

The power indicator will light to solid orange. Then wait several seconds because buttons may not function for these several seconds.

3.Press the STANDBY/ON button on the projector or remote control.

The projector lamp will light up and the POWER indicator will begin blinking green. When the power is completely on, the indicator will stop blinking light green.

To display the picture, select an input signal according to the section "Selecting an input signal" ( 18).

ViewSonic PJ452

16

Image 20

Contents PJ452 LCD Projector Compliance Information Important Safety Instructions Copyright Information Trademark acknowledgment PJ452 Model No.VS10948About this manual Contents Projector features About contents of packagePart names ProjectorMagnify Remote controlControls Preparations Fastening the lens coverPutting batteries Using the remote control About the filter cover for bottom-up use Setting up Arrangement At 43 screenAdjusting the projectors elevator Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting power supply Power on/off Turning on the powerTurning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom magnifying powerAdjusting the focus Selecting an aspect ratioUsing the automatic adjustment feature At a video signalAdjusting the position Correcting the keystone distortionsTemporarily blanking the screen Using the partial magnify featureFreezing the screen Multifunctional setting Using the menu functionTo display a menu To choose the target menuTo choose the target item Setup Menu To resetTo operate To return to the previous menuAspect ZoomKeystone ModeReset WhisperMirror Filter TimePicture menu To adjust #1 CUSTOM, #2 Custom or #3 CustomUsing a test pattern To adjust Custom High Middle Custom LOWProgressive TV Film Turn OFFMY Memory LOAD1 LOAD2 LOAD3 LOAD4Phase Image menuNormal Over ScanAuto Adjust At a video signalSize ExecuteInput menu Space Auto RGBVideo Format Auto Ntsc PAL SecamInformation Frame LockTurn on Turn OFF Setup menu VolumeNormal Whisper Normal Hinvert Vinvert H&VINVERTScreen menu Start UP Sync is OUT of Range MessageNo Input is Detected Option menu SearchRGB S-VIDEO Video Auto OFFReset  Cancel Lamp TimeService FAN Speed Auto Adjust Factory Reset GhostEnable Disable High NormalMaintenance LampCase of replacement by yourself Air filter ViewSonic PJ452 Other care Inside of the projectorTroubleshooting Related messagesInternal portion temperature is rising Regarding the indicator lamps It is time to clean the air filter, or there is no air Cooling fan is not operatingThere is a possibility that the interior portion Has become heatedPhenomena that may easily be mistaken for machine defects Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connected Brightness is adjusted to an extremelyColor settings are not correctly adjusted 25, 28 Color Space setting is not suitableWarranty and after-service SpecificationsSpecifications Unit mm Customer Support Limited Warranty ViewSonic Projector