ViewSonic PJ452 manual Size, Auto Adjust, Execute, At a video signal

Page 35

IMAGE menu (continued)

Item

Description

H SIZE

Using the buttons ▲/▼ adjusts the horizontal size.

 

Large ↔ Small

 

• This item can be chosen only at a RGB signal

 

• When this adjustment is excessive, the picture may not be

 

displayed correctly. In such a case, please reset the adjustment

 

pressing the RESET button during this operation.

AUTO ADJUST

Choosing this item performs the automatic adjustment feature.

EXECUTE

At a RGB signal

 

The vertical position, the horizontal position, the clock phase

 

and horizontal size will be automatically adjusted.

 

Make sure that the application window is set to its maximum

 

size prior to attempting to use this feature. A dark picture may

 

still be incorrectly adjusted. Use a bright picture when

 

adjusting.

 

At a video signal

 

The video format best suited for the respective input signal will

 

be selected automatically.

 

This function is available only when the AUTO mode is

 

selected to the item VIDEO FORMAT of INPUT menu. For a

 

component video signal, the signal type is identified

 

automatically, independently of this function.

 

• The automatic adjustment operation requires approximately

 

10 seconds. Also please note that it may not function correctly

 

with some input.

ViewSonic PJ452

31

Image 35
Contents PJ452 LCD Projector Compliance Information Important Safety Instructions Copyright Information Trademark acknowledgment PJ452 Model No.VS10948About this manual Contents About contents of package Projector featuresProjector Part namesMagnify Remote controlControls Fastening the lens cover PreparationsPutting batteries Using the remote control About the filter cover for bottom-up use Setting up At 43 screen ArrangementAdjusting the projectors elevator About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting power supply Turning on the power Power on/offTurning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an aspect ratio Searching an input signalAdjusting the zoom magnifying power Adjusting the focusCorrecting the keystone distortions Using the automatic adjustment featureAt a video signal Adjusting the positionTemporarily blanking the screen Using the partial magnify featureFreezing the screen To choose the target menu Multifunctional settingUsing the menu function To display a menuTo choose the target item To return to the previous menu Setup MenuTo reset To operateMode AspectZoom KeystoneFilter Time ResetWhisper MirrorPicture menu To adjust #1 CUSTOM, #2 Custom or #3 CustomUsing a test pattern High Middle Custom LOW To adjust CustomLOAD1 LOAD2 LOAD3 LOAD4 ProgressiveTV Film Turn OFF MY MemoryOver Scan PhaseImage menu NormalExecute Auto AdjustAt a video signal SizeFormat Auto Ntsc PAL Secam Input menuSpace Auto RGB VideoInformation Frame LockTurn on Turn OFF Normal Hinvert Vinvert H&VINVERT Setup menuVolume Normal WhisperScreen menu Start UP Sync is OUT of Range MessageNo Input is Detected Auto OFF Option menuSearch RGB S-VIDEO VideoLamp Time Reset  CancelHigh Normal ServiceFAN Speed Auto Adjust Factory Reset Ghost Enable DisableLamp MaintenanceCase of replacement by yourself Air filter ViewSonic PJ452 Inside of the projector Other careRelated messages TroubleshootingInternal portion temperature is rising Regarding the indicator lamps Has become heated It is time to clean the air filter, or there is no airCooling fan is not operating There is a possibility that the interior portionPhenomena that may easily be mistaken for machine defects Electrical power cord is not pluggedPower switch is not set to the on position Color Space setting is not suitable Signal cables are not correctly connectedBrightness is adjusted to an extremely Color settings are not correctly adjusted 25, 28Specifications Warranty and after-serviceSpecifications Unit mm Customer Support Limited Warranty ViewSonic Projector