ViewSonic PJ452 manual Warranty and after-service, Specifications

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” ( 46) and run through the suggested checks. If this does not resolve the problem, please contact your dealer or the service company. They will tell you what warranty condition is applied.

Specifications

	NOTE	･ This specifications are subject to change without notice.
		Item	Specification
Product name			Liquid crystal projector
Liquid		Panel size	1.5 cm (0.6 type)
Crystal		Drive system	TFT active matrix
panel		Pixels	786,432 pixels (1,024 horizontal x 768 vertical)
Lens			F=1.77 f=20.7 mm
Lamp			165W UHB
Power Supply			AC100-120V/2.7A, AC220-240V/1.5A
Power Consumption			240W
Temperature range			5 ~ 35°C (Operating)
Size			285 (W) x 73 (H) x 202 (D) mm
			(Not including protruding parts)
			･ Please refer to the following figure.
Weight (mass)			2.25 kg
Ports			RGB input
			RGB ........ D-sub 15pin mini x1
			Communication port:
			CONTROL .....D-sub 9pin x1
			Video input
			VIDEO .........................RCA x1
			S-VIDEO ................ S-video x1
			Audio input
			AUDIO ...... Stereo mini x1
Optional		Lamp	RLC-004
		Air filter and
parts			Please consult your dealer or ViewSonic for part information.
		others

ViewSonic PJ452 52