ViewSonic PJ452 manual Option menu, Search, RGB S-VIDEO Video, Auto OFF

OPTION menu

With the OPTION menu, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table.

Item	Description
AUTO	Using the buttons ▲/▼ turns on/off the automatic signal
SEARCH	search function.
	TURN ON TURN OFF
	When the TURN ON is selected, detecting no signal
	automatically cycles through input ports in order of following.
	Then when an input is found, the projector will stop searching
	and display the image.
	If no signal is found, the projector will return to the state before
	the operation.
	RGB S-VIDEO VIDEO
	═════=═════╝
AUTO OFF	Using the buttons ▲/▼ adjusts the time to count down to
	automatically turn the projector off.
	Long (max. 99 minutes) ↔ Short (min. 0 minute = DISABLE)
	When the time is set to 0, the projector is not turned off
	automatically.
	When the time is set to 1 to 99, and when the passed time with
	a no-signal or an unsuitable signal reaches at the set time, the
	projector lamp will go off and the power indicator begins
	blinking. Please refer to the section “Turning off the power.”
	( 16)

ViewSonic PJ452 38