ViewSonic PJ1165 manual Remote Control, About The Laser Pointer, Putting Batteries

Page 13

Remote Control

About The Laser Pointer

WARNING

The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed.

Putting Batteries

CAUTION

About the battery

Keep a battery away from children and pets.

Use only the battery specified: two AA batteries.

Do not mix new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading the battery (as indicated in the remote control).

Dispose of batteries in accord with environmental laws.

1 Remove the battery cover. 2

Insert the batteries. Align

3 Close the battery cover.

Slide back and remove

and insert the two AA

Replace the battery cover

the battery cover in the

batteries according to

in the direction of the

direction of the arrow.

their plus minus terminals

arrow and snap it back

 

(as indicated in the

into place.

 

remote control).

 

ViewSonic PJ1165

12

Image 13
Contents PJ1165 Contents For Your Records Preparation Projector FeaturesProjector Part NamesProjector Front/Right Projector Rear/Left Laser Indicator Remote ControlControl Buttons Control Panel on the ProjectorArrangement Setting UpSide View Side View Reference for the 43 aspect ratioAdjusting The Projector’s Elevator Plug-and-Play Capability Connecting Your DevicesExamples of connection with a computer Scart Examples of connection with a VCR/DVD PlayerConnecting The Power Supply About The Laser Pointer Remote ControlPutting Batteries Using The Remote ID Feature Operating The Remote ControlID Change Using The Mouse/Keyboard Control Function Turning On The Power Power On/OffTurning Off The Power Operating Selecting An Input SignalAt a M1-D signal Using The Automatic Adjustment FeatureAt a RGB signal not M1-D At a video signal At a RGB signalCorrecting The Keystone Distortion Adjusting The Picture PositionMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Page Selecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Main Menu Custom Menu PICTURE-1 MenuMY Memory PICTURE-2 Menu Input Menu P. Input PowerupP. Posit InputPower OFF AdjustPower on Auto MenuRGB BNC Video S-VIDEO Component SearchScreen Menu Message How to register your picture as the MyScreenExecute Option Menu Service Menu Execute Õ Cancel SetupNetwork Menu DhcpWhen you use a Network unsuitable to the Dhcp function Network Setting UpEx. Case of IP Address = About disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRegarding The Indicator Lamps Either there is no lamp and/or lamp cover, or It is time to clean the air filter, or there is no airEither of these has not been properly fixed Cooling fan is not operatingPhenomena That May Easily Be Mistaken For Machine Defects Tion such as by a power outage blackout, etcVolume is adjusted to an extremely low level This specifications are subject to change without notice SpecificationsCountry/Region Web site = Telephone Customer SupportViewsonic Projector Limited WarrantyAppendix Power Cord Safety GuidelinesCompliance Information for Canada Compliance Information for U.S.ACompliance Information for European Countries User Information for all CountriesViewSonic→ Corporation