ViewSonic PJ1165 manual Message, Execute, How to register your picture as the MyScreen

AUTO Menu (continued)

Item		Description
MESSAGE	Select the TURN ON or the TURN OFF using the S/T buttons.:
	TURN ON	TURN OFF
	When the TURN ON is selected, the following message function
	works.
	The message of the “AUTO IN PROGRESS” for the auto
	adjustment.
	The message of the “NO INPUT IS DETECTED”
	The message of the “SYNC IS OUT OF RANGE”
	The message of the “Searching…”
	The message of the “Detecting…”
	The indication of the input signal by input change.
	The indication of the aspect ratio by changing the aspect ratio.
	The indication of “FOCUS” by adjusting the focus.
RESET	Select the EXECUTE using the S button to reset the SCREEN menu
	items.:	CANCEL
	EXECUTE
	The items of the SCREEN menu are collectively returned to the initial
	setting.
How to register your picture as the MyScreen

MyScreen is pointed on the SCREEN menu.

Press the X button

	The MyScreen appears.
	Do you capture the picture from	NO: Press the ESC/RESET button
	the current screen?
If the ESC/RESET
button	YES: Press the ENTER button

The picture freeze and the frame for capturing appears. Move the frame to the position of the picture which you want to use, using S/T/W/X buttons, and press the ENTER button to register.

Registering.

It takes about 1 minute to register.

Just when the picture registration is completed the registered screen and the message of the right is displayed for a few seconds.

If the picture registration failed, the message of the right is dis-

played for a few seconds.

ViewSonic PJ1165 32