ViewSonic PJ1165 manual Phenomena That May Easily Be Mistaken For Machine Defects

Page 45

Phenomena That May Easily Be Mistaken For Machine Defects

WARNING

Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquid or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet After making sure that the smoke or odor has stopped, contact your dealer or service company.

Before requesting repair, please check in accordance with the following chart. If the situation cannot be corrected, please contact your dealer or service company.

NOTE

•Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

Phenomenon

Cases not involving a machine defect

Reference

page(s)

 

 

 

 

 

 

The power cord is not plugged in.

11

 

Correctly connect the power cord.

 

 

The power switch is not set to the on position.

15

 

Set the power switch to [ ] (On).

 

 

The main power source has been interrupted during opera-

 

 

tion such as by a power outage (blackout), etc.

15

Power does not

Please turn the power off, and allow the unit to cool down at

come on

least 20 minutes. After the projector has sufficiently cooled

 

 

down, please turn the power on again.

 

 

Either there is no lamp and/or lamp cover, or either of these

 

 

has not been properly fixed.

 

 

Please turn the power off, and allow the unit to cool down at

35, 36

 

least 45 minutes. After the projector has sufficiently cooled

 

 

 

down, please make confirmation of the attachment state of the

 

 

lamp and lamp cover, and then turn the power on again.

 

 

 

 

 

The signal cables are not correctly connected.

8, 9

 

Correctly connect the connection cables.

 

Neither sounds

 

 

Signal source does not correctly work.

-

nor pictures are

Correctly set up the signal source device by referring to the

outputted.

manual of the source device.

 

 

The input changeover settings are mismatched.

16

 

Select the input signal, and correct the settings.

 

(This table is continued to the following page.)

ViewSonic PJ1165

44

Page 44 Page 46
Image 45
Page 44 Page 46
Contents PJ1165 Contents For Your Records Preparation Projector FeaturesPart Names ProjectorProjector Front/Right Projector Rear/Left Laser Indicator Remote ControlControl Buttons Control Panel on the ProjectorArrangement Setting UpSide View Side View Reference for the 43 aspect ratioAdjusting The Projector’s Elevator Plug-and-Play Capability Connecting Your DevicesExamples of connection with a computer Scart Examples of connection with a VCR/DVD PlayerConnecting The Power Supply Remote Control About The Laser PointerPutting Batteries Operating The Remote Control Using The Remote ID FeatureID Change Using The Mouse/Keyboard Control Function Power On/Off Turning On The PowerTurning Off The Power Operating Selecting An Input SignalAt a M1-D signal Using The Automatic Adjustment FeatureAt a RGB signal not M1-D At a video signal At a RGB signalCorrecting The Keystone Distortion Adjusting The Picture PositionAdjusting The Volume Muting The SoundTemporarily Blanking The Screen Page Selecting An Audio Input Displaying The Child WindowMultifunctional Settings Using The Menu FunctionsEx. Turning off the built-in speaker Main Menu Custom Menu PICTURE-1 MenuMY Memory PICTURE-2 Menu Input Menu P. Input PowerupP. Posit InputPower OFF AdjustPower on Auto MenuRGB BNC Video S-VIDEO Component SearchScreen Menu How to register your picture as the MyScreen MessageExecute Option Menu Service Menu Execute Õ Cancel SetupNetwork Menu DhcpNetwork Setting Up When you use a Network unsuitable to the Dhcp functionEx. Case of IP Address = About disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRegarding The Indicator Lamps Either there is no lamp and/or lamp cover, or It is time to clean the air filter, or there is no airEither of these has not been properly fixed Cooling fan is not operatingPhenomena That May Easily Be Mistaken For Machine Defects Tion such as by a power outage blackout, etcVolume is adjusted to an extremely low level This specifications are subject to change without notice SpecificationsCountry/Region Web site = Telephone Customer SupportViewsonic Projector Limited WarrantyAppendix Power Cord Safety GuidelinesCompliance Information for Canada Compliance Information for U.S.ACompliance Information for European Countries User Information for all CountriesViewSonic→ Corporation
Top Page Image Contents