ViewSonic PJ1165 manual Using The Mouse/Keyboard Control Function

Page 15

Using The Mouse/Keyboard Control Function

CAUTION

•Before connecting, read the manuals of the device you will connect. Mistaken use of the mouse/keyboard control could damage your equipment.

•Only connect to a PC.

•Do not unplug the connector cables while the computer is operating.

Using the USB control feature, you can use the remote control as a simplified mouse or keyboard of the computer.

Connect the USB port of the projector to the computer via the USB cable.

memo The USB control can be used with
Windows 95 OSR 2.1 or higher. It may							Mouse left button
Windows 95 OSR 2.1 or higher. It may							Mouse left button
not be possible to use the remote						Mouse move pointer
control, depending on the computer’s
control, depending on the computer’s
configurations and mouse drivers.						Keyboard
configurations and mouse drivers.
memo The function can be used only for the
		Arrow keys

functions illustrated on the right.
functions illustrated on the right.
memo The projector would be enumerated						Mouse right button
memo The projector would be enumerated						Mouse right button
as a mouse and a keyboard of HID						Keyboard				key
(Human Interface Device) class devices,
(Human Interface Device) class devices,
after connecting cable.	(Front)										(Rear)
	(Front)										(Rear)

ViewSonic PJ1165

14

Image 15

Contents PJ1165 Contents For Your Records Preparation Projector FeaturesPart Names ProjectorProjector Front/Right Projector Rear/Left Control Panel on the Projector Remote ControlLaser Indicator Control ButtonsSide View Reference for the 43 aspect ratio Setting UpArrangement Side ViewAdjusting The Projector’s Elevator Plug-and-Play Capability Connecting Your DevicesExamples of connection with a computer Scart Examples of connection with a VCR/DVD PlayerConnecting The Power Supply Remote Control About The Laser PointerPutting Batteries Operating The Remote Control Using The Remote ID FeatureID Change Using The Mouse/Keyboard Control Function Power On/Off Turning On The PowerTurning Off The Power Operating Selecting An Input SignalAt a RGB signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signal not M1-D At a video signalCorrecting The Keystone Distortion Adjusting The Picture PositionAdjusting The Volume Muting The SoundTemporarily Blanking The Screen Page Selecting An Audio Input Displaying The Child WindowMultifunctional Settings Using The Menu FunctionsEx. Turning off the built-in speaker Main Menu Custom Menu PICTURE-1 MenuMY Memory PICTURE-2 Menu Input Menu Input PowerupP. Input P. PositAuto Menu AdjustPower OFF Power onRGB BNC Video S-VIDEO Component SearchScreen Menu How to register your picture as the MyScreen MessageExecute Option Menu Service Menu Dhcp SetupExecute Õ Cancel Network MenuNetwork Setting Up When you use a Network unsuitable to the Dhcp functionEx. Case of IP Address = About disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRegarding The Indicator Lamps Cooling fan is not operating It is time to clean the air filter, or there is no airEither there is no lamp and/or lamp cover, or Either of these has not been properly fixedPhenomena That May Easily Be Mistaken For Machine Defects Tion such as by a power outage blackout, etcVolume is adjusted to an extremely low level This specifications are subject to change without notice SpecificationsCountry/Region Web site = Telephone Customer SupportViewsonic Projector Limited WarrantyAppendix Power Cord Safety GuidelinesUser Information for all Countries Compliance Information for U.S.ACompliance Information for Canada Compliance Information for European CountriesViewSonic→ Corporation