Replacing The Lamp
If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible.
1Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes.
2Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.
In the case of replacement by yourself,
3After making sure that the projector has cooled adequately, slide the knob of a lamp cover lock as shown in the Figure.
Then, one side of the lamp cover is raised. Pull up the lamp cover and remove it, as shown in the Figure.
4Unscrew the 3 screws, and slowly pull out the lamp by the handle. Becareful not to touch the inside of the lamp case.
5Insert the new lamp, and tighten the 3 screws firmly to lock it in place.
6Interlocking the 2 tabs of the lamp cover to the projector, put the lamp cover on the projector.
Then push the point of the lamp cover to fix it, as shown in the figure. Make sure that the lamp cover doesn’t come up.
7Turn on the projector power, and reset the lamp timer.
(1)While the projector running, press the MENU button to open the menu.
Lamp cover knob | Lamp cover |
Screws
Tabs
(2)Choose the “OPTION” on the menu using the S/T button, then press the X button or ENTER button.
(3)Choose the “LAMP TIME” using the S/T button, then press and hold the RESET button for 3 seconds.
(4)Choose the “RESET” using the S button.
memo Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions.
ViewSonic PJ1165 | 38 |