ViewSonic 300 manual Basic Operation

Basic Operation

The basic operations shown in Table 3 can be performed with the supplied remote control device or by way of the projector’s control panel. Items indicated by (*) may be used from the control panel.

			Table 3: Basic Operation
Item			Description
	Select Input Signal (*): Press the INPUT button.
	RGB IN 1→ RGB IN 2
	→ VIDEO→	S-VIDEO→COMPONENT VIDEO (→ RGB IN 1)
	Select RGB Input: Press the RGB button.
INPUT	VIDEO/S-VIDEO/COMPONENT VIDEO→ RGB IN 1/RGB IN 2
	RGB IN 1→	RGB IN 2 (→ RGB IN 1)
SELECT
	Select Video Input: Press the VIDEO button.
	RGB IN 1/RGB IN 2→ VIDEO/S-VIDEO/COMPONENT VIDEO
	VIDEO→ S-VIDEO→		COMPONENT VIDEO (→ VIDEO)
	• The selected signal name is displayed for approximately 3 seconds when the
	input signal is changed.
	Set/Clear Position Adjustment Mode: Press the POSITION button.
	The [ ] icon is displayed in the POSITION mode.
	Image Position Adjustment: Press the			and	buttons in the
POSITION	POSITION mode.
	• Valid only in the MAGNIFY mode if a video signal is detected.
	• After approximately 10 seconds of inactivity the [			] icon is extinguished and the
	POSITION mode will be cleared automatically.
	•	and	buttons may operate as the mouse control button. See page 4.
	Initialize Each Item: Select an item and press the RESET button.
	Initialize Position Adjustment: Press the RESET button and the
RESET (*)	POSITION mode. This function is valid only if a RGB signal is input.
	• Valid except for the VOLUME, LANGUAGE, WHISPER and H PHASE.
	• The RESET button may operate as the mouse control button. Refer to page 4.
	Set MAGNIFY Mode: Press the MAGNIFY button.
	Move Magnified Area: Run the POSITION in the MAGNIFY mode.
MAGNIFY	Adjust Magnification: Press the MAGNIFY			button in MAGNIFY mode.
	Clear MAGNIFY Mode: Press the MAGNIFY			button.
	• The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT
	SELECT or VIDEO, or by changing the input signal.
	Set/Clear FREEZE Mode: Press the FREEZE button. The [				] icon is displayed,
	and the image will be frozen in the FREEZE mode.
FREEZE	• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,
	Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the
	input signal.
	• Do not forget to clear frozen static images.

NOTE: • Use the remote control device at a distance of approximately 5 m from the sensor on the front of the projector, and within a range of 30 °left-right. Strong light and obstacles will interfere with the operation of the remote control device.

10ViewSonic PJ750