Options Menu
The following adjustments and settings are available when OPT. is |
| ||||
selected on the menu. Select an item with the | and buttons, and | ||||
start or stop the operation with the | and | buttons. |
| ||
|
| Table 7: Options Menu |
| ||
Item |
|
| Description |
| |
|
|
|
|
| |
VOLUME | Reduce | Increase |
|
| |
|
|
| |||
MENU | Select Menu Background Color: Select with the | buttons. | |||
COLOR |
|
|
|
| |
|
|
| |||
LANGUAGE | Select Menu Display Language: Select with the | buttons. | |||
|
|
| |||
| Set AUTO OFF: Set | buttons. The system | |||
| automatically enters the standby mode when a signal is not received for the set | ||||
AUTO OFF | time. |
|
|
| |
Clear AUTO OFF: Select STOP (0 min.) with the | button. When STOP is | ||||
| |||||
| selected the system does not enter the standby mode even if no signal is | ||||
| detected. |
|
|
| |
|
|
| |||
| SYNC ON G Valid: Select TURN ON with the | button. | |||
| SYNC ON G Invalid: Select TURN OFF with the | button. | |||
SYNC ON G | • May not be displayed correctly with some input signals when SYNC ON G is | ||||
| valid. In such cases, remove the signal connector so that no signal is received, | ||||
| set SYNC ON G to invalid, and reconnect the signal. | ||||
|
|
| |||
| Set / Clear WHISPER Mode: Press the | button. When WHISPER is | |||
WHISPER | selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise | ||||
| level from the unit is reduced, and brightness level on screen is a little lower. | ||||
|
|
|
|
| |
ViewSonic PJ750 15