ViewSonic 300 manual Cabling, Audio in RGB

Cabling

Refer to the table below for connecting each terminal of the projector to each device.

	Table 2: Cabling
Function	Terminal	Cable
Analog RGB input	RGB IN 1	Accessory or optional RGB cable with D-
	RGB IN 2
		sub 15-pin shrink jack and inch thread
		screws.
Analog RGB output	RGB OUT
	AUDIO IN [RGB 1]
Audio input	(interlocked with RGB IN 1)	Optional audio cable with stereo mini-jack
(from the computer)
	AUDIO IN [RGB 2]
	(interlocked with RGB IN 2)
PS/2 mouse control		Accessory PS/2 mouse cable
ADB mouse control	CONTROL	Optional ADB mouse cable
Serial mouse control		Optional serial mouse cable
RS/232C communication		Optional RS-232C mouse cable
USB mouse control	USB	Optional USB cable
S-video input	S-VIDEO	Optional S-video cable with mini DIN 4-pin
		jack
Video input	VIDEO	Optional video/audio cable
	COMPONENT VIDEO Y
Component video input	COMPONENT VIDEO CB/PB	Accessory component video cable
	COMPONENT VIDEO CR/PR
Audio input	AUDIO IN L	Optional video/audio cable or optional
(from video equipment)		audio cable with RCA jack
	AUDIO IN R
Audio output	AUDIO OUT	Optional audio cable with stereo mini-jack

CAUTION

•An incorrect connection may result in fire or electric shock. Be sure to read this manual before connecting the projector.

•Be sure to turn off all devices to be connected before you connect the projector.

•The cables may have to be connected with their core set to the projector’s side. Only connect the cable supplied with the projector or those specified.

NOTE:

•Before you connect the projector, be sure to read the manual of the respective device to be connected. Make sure the projector is compatible with the devices.

•Secure the screws of the connectors and tighten them.

•The optional Mac adapter may be necessary for certain RGB input modes.

•Certain computers may be provided with multiple display modes. The use of such modes may not be possible with this projector.

ViewSonic PJ750 7