INSTALLATION
Installation of the Projector and Screen
To set the screen size and projection distance, see the illustration and table below.
The projection distance shown in the table below indicates the full size (1024 × 768 dots). a:Distance from the projector to the screen (± 10%). b:Distance from the lens center to the bottom of the
screen (± 10%).
Table 1: Reference for Installation |
|
| ||||
Screen size |
| a [inches (m)] |
| |||
[inches (m)] |
|
|
|
| ||
Min. | Max. | |||||
|
| |||||
40 | (1.0) | 62 | (1.6) | 82 | (2.1) | |
60 | (1.5) | 94 | (2.4) | 123 | (3.1) | |
80 | (2.0) | 127 | (3.2) | 164 | (4.2) | |
100 | (2.5) | 160 | (4.1) | 205 | (5.2) | |
120 | (3.0) | 192 | (4.9) | 246 | (6.3) | |
150 | (3.8) | 241 | (6.1) | 308 | (7.8) | |
200 | (5.0) | 323 | (8.2) | 411 (10.4) | ||
CAUTION
Top View
Side View
•Install the projector in a suitable environment as indicated in this manual.
•If you use a metal tool or the like to mount this unit, be sure to connect it via earth connection so as to avoid a risk of fire or electric shock.
Connect the ground terminal of the AC inlet of this unit to the ground terminal provided in the building using an optional
•Always use the liquid crystal projector in a horizontal position, if possible. If you operate the liquid crystal projector with its lens upwards, its lens downwards or to the side, the heat generated inside the projector may build up and cause malfunctions or damages. Be especially careful to never block the ventilation holes.
•Do not install the LCD projector in a smoky surrounding, since smoke residue may be accumulating on critical parts (i.e. LCD panel, lens, etc.).
Angle Adjustment
Use the foot adjusters located on the bottom of the projector to adjust the angle of projection. This angle can be adjusted within approximately 0° to 9°.
Foot Adjusters | Press the foot adjuster button | Rear Foot Adjuster |
| ||
|
|
1Lift up the front side of the projector and press the button of the foot adjuster to adjust the angle of projection.
2To lock the foot adjuster at the desired angle, release the button.
3Turn the screw of the foot adjuster to precisely adjust it. Do not use force, since this could damage the adjuster or result in a failure of the lock.
CAUTION
•Do not release the foot adjuster button unless you hold the projector, or else the projector may overturn or the fingers may get caught.
6 ViewSonic PJ750