Eiki LC-SD12 No Show Function, Timer Function, Sound Adjustment, Direct Operation, Menu Operation

Page 21

Basic Operation

No Show Function

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo item in the Setting menu ( ☞ P36 ), the screen changes each time you press the NO SHOW button as follows :

black out ➜ the captured image ➜ normal ➜......

Message disappears after 4 seconds.

P-Timer Function

Press the P-TIMER button on the remote control. The timer display “00 : 00” appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59).

To stop P-Timer display, press the P-TIMER button. And then, press the P-TIMER button again to cancel P-Timer function.

Sound Adjustment

Direct Operation

Volume

Press the VOLUME +/– buttons on the remote control or on the top control to adjust volume. The volume dialog box appears on the screen for a few seconds.

The VOLUME + button to increase volume, and the VOLUME – button for decreasing.

Mute

Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press Volume +/–.

Menu Operation

1	Press the MENU button to display the On-Screen Menu. Press
	the Point 7 8 buttons to move the red frame pointer to Sound
	Menu icon.
2	Press the Point d button to move the red frame pointer to the
	item that you want to select, and then press the SELECT button.

Volume

To increase volume, Press the Point 8 button, and Press the Point 7 button to decrease volume.

Mute

Press the Point 7 8 buttons to mute the sound. Dialog box display is changed to “On” and sound is muted. To restore sound to its previous level, press the Point 7 8 buttons again.

Indicates approximate level of volume.

Press the MUTE button to set Mute function "On" or "Off".

The display disappears after 4 seconds.

Sound Menu icon

SOUND MENU

Indicates approximate level of volume.

Close Sound Menu.

Basic Operation

21

Image 21

Contents Model LC-SD12 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsInstalling the Projector in Proper Position Air CirculationMoving the Projector Federal Communication Commission Notice ComplianceParts Names and Functions FrontBack Bottom USB Service PortAudio in AV Audio in COMPUTER/ ComponentTop Controls and Indicators Operating Range Remote ControlRemote Control Battery Installation Remove the batteryCompartment lid Positioning the Projector Adjustable Feet21.3’ 6.5m 16.1’ 4.9m 10.6’ 3.2m CenterProjector side AC Outlet side Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe 200 240 V ACCables used for connection Connecting to a ComputerVideo Source example Component video output Connecting to Video EquipmentVideo Cassette RecorderVideo Disc Player Audio OutputBasic Operation Turning On the ProjectorTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control Input Menu PC Adjust Menu Image Adjust Menu Sound Menu Setting MenuAV System Menu Image Adjust Menu Menu BarFocus Adjustment Zoom AdjustmentKeystone Adjustment Picture Freeze FunctionSound Adjustment Timer FunctionNo Show Function Direct OperationComputer Input Input Source SelectionRGB Computer System Selection Auto ModeSelecting Computer System Manually SvgaAuto PC Adjustment PC Adjust MenuAuto PC Adj Manual PC Adjustment Mode free ResetDisplay area Display area HImage Level Selection Direct OperationMenu Operation Image Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputInput Menu VideoComponent Input Source Selection Component, RGB Scart 21-pinVideo Jack or S-Video Jack Video System SelectionComputer in / Component in Jack Y, Pb/Cb, Pr/Cr AutoUser preset picture adjustment in Image Adjust Menu P34-35 Picture level adjusted for the picture with fine toneCinema Image button Standard CinemaColor Item you want to adjust and then press the Select button.Tint Press the Point 78buttons to obtain proper color. From 0 toClose the Image Menu ProgressiveProvides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Menu SettingLamp mode Ceiling function Rear function Power managementCeiling RearRemote Control To change the code of the remote controlFactory default To change the code of the projectorProjector is shut down and the Warning indicator lights red Maintenance and CleaningTop Control Then check the items belowAir Filter Attaching the Lens CoverRecommendation Cleaning the Projector Cabinet Cleaning the Projection LensReplacement Lamp Type No Lamp ReplacementReset the Lamp Replace Counter Model No. of your projectorWhen the lamp replace counter is reset, Reset the lamp replace counterLamp Replace Counter Move the pointer to Yes and then press the SelectTroubleshooting Problem No power Image is out of focusSome displays are not seen during the operation Appendix Problem Remote Control does Not workIndicators and Projector Condition Computer Input Menu TreeSetting Video Input SettingsMain menu Sound SystemCompatible Computer Specifications FreqKHz Technical Specifications Optional Parts Configuration of TerminalsCOMPONENT-VGA Cable Type No SCART-VGA Cable Type NoKey to better communications Canada