Eiki LC-SD12 owner manual Auto PC Adjustment, PC Adjust Menu

Page 24

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to your computer. This function can be operated as follows.

	Auto PC Adj.
1	Press the MENU button to display the On-Screen Menu. Press
	the Point 7 8 buttons to move the red frame pointer to the PC
	Adjust Menu icon.
2	Press the Point d button to move the red frame pointer to the
	Auto PC Adj. icon and then press the SELECT button twice.

This Auto PC Adjustment can be also executed by pressing the Auto PC button on the remote control.

To store adjustment parameters :

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in PC System Menu ( ☞ P23 ). Refer to " Store " of Manual PC Adjustment section ( ☞ P26 ).

Note :

–Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is

not provided properly through this function, manual adjustments are required. ( ☞ P25, 26 )

–Auto PC Adjustment function cannot be operated when 480p, 575p, 480i,

575i, 720p (HDTV), 1035i (HDTV) or 1080i (HDTV) is selected on PC SYSTEM Menu. ( ☞ P23).

PC Adjust Menu icon

PC ADJUST MENU

Move the red frame pointer to Auto PC Adj. icon and press the SELECT button.

24

Image 24

Contents Model LC-SD12 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandInstalling the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communication Commission NoticeParts Names and Functions FrontBack Bottom Service Port USBAudio in AV Audio in COMPUTER/ ComponentTop Controls and Indicators Remote Control Operating RangeRemote Control Battery Installation Remove the batteryCompartment lid Adjustable Feet Positioning the Projector21.3’ 6.5m 16.1’ 4.9m 10.6’ 3.2m CenterConnecting the AC Power Cord Projector side AC Outlet sideFor the U.S.A. and Canada For Continental Europe 200 240 V ACConnecting to a Computer Cables used for connectionConnecting to Video Equipment Video Source example Component video outputVideo Cassette RecorderVideo Disc Player Audio OutputBasic Operation Turning On the ProjectorTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control Setting Menu Input Menu PC Adjust Menu Image Adjust Menu Sound MenuAV System Menu Image Adjust Menu Menu BarZoom Adjustment Focus AdjustmentKeystone Adjustment Picture Freeze FunctionTimer Function Sound AdjustmentNo Show Function Direct OperationComputer Input Input Source SelectionRGB Auto Mode Computer System SelectionSelecting Computer System Manually SvgaAuto PC Adjustment PC Adjust MenuAuto PC Adj Manual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection Direct OperationMenu Operation Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput Menu VideoInput Source Selection Component, RGB Scart 21-pin ComponentVideo System Selection Video Jack or S-Video JackComputer in / Component in Jack Y, Pb/Cb, Pr/Cr AutoPicture level adjusted for the picture with fine tone User preset picture adjustment in Image Adjust Menu P34-35Cinema Image button Standard CinemaItem you want to adjust and then press the Select button. ColorTint Press the Point 78buttons to obtain proper color. From 0 toProgressive Close the Image MenuProvides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Setting MenuCeiling function Rear function Power management Lamp modeCeiling RearTo change the code of the remote control Remote ControlFactory default To change the code of the projectorMaintenance and Cleaning Projector is shut down and the Warning indicator lights redTop Control Then check the items belowAir Filter Attaching the Lens CoverRecommendation Cleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Replacement Lamp Type NoReset the Lamp Replace Counter Model No. of your projectorReset the lamp replace counter When the lamp replace counter is reset,Lamp Replace Counter Move the pointer to Yes and then press the SelectTroubleshooting Problem No power Image is out of focusSome displays are not seen during the operation Problem Remote Control does Not work AppendixIndicators and Projector Condition Menu Tree Computer InputVideo Input Settings SettingMain menu Sound SystemCompatible Computer Specifications FreqKHz Technical Specifications Configuration of Terminals Optional PartsCOMPONENT-VGA Cable Type No SCART-VGA Cable Type NoKey to better communications Canada