Eiki LC-SD12 owner manual Video Input, Input Source Selection Video, S-Video, Input Menu

Page 30

Video Input

Input Source Selection ( Video, S-Video )

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Video

Computer

Menu Operation

1	Press the MENU button to display the On-Screen Menu. Press
	the Point 7 8 buttons to move the red frame pointer to the
	Input Menu icon.
2	Press the Point d button to move the red arrow pointer to Video
	and then press the SELECT button. Source Select Menu will
	appear.
3	Move the pointer to the source that you want to select and then
	press the SELECT button.
		When selecting Auto, the projector automatically detects
Auto		When selecting Auto, the projector automatically detects
		incoming video signal, and adjusts itself to optimize its
		incoming video signal, and adjusts itself to optimize its
		performance. The projector selects connection in the
		following order:
		1st S-VIDEO
		2nd VIDEO
		If both the S-VIDEO jack and the VIDEO jack are
		connected at the same time when Auto is selected in the
		Input Menu, the S-VIDEO jack will override the signal
		from the VIDEO jack.
		When video input signal is connected to VIDEO jack,
Video		When video input signal is connected to VIDEO jack,
		select Video.
		select Video.
		When video input signal is connected to S-VIDEO jack,
S-Video		When video input signal is connected to S-VIDEO jack,
		select S-Video.
		select S-Video.

Input Menu icon

INPUT MENU

Move the red arrow pointer to Video and press the SELECT button.

VIDEO

Source Select Menu (VIDEO)

Move the pointer to the source and press the SELECT button.

30

Image 30

Contents Model LC-SD12 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandInstalling the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communication Commission NoticeParts Names and Functions FrontBack Bottom Audio in AV Service PortUSB Audio in COMPUTER/ ComponentTop Controls and Indicators Remote Control Operating RangeRemote Control Battery Installation Remove the batteryCompartment lid 21.3’ 6.5m 16.1’ 4.9m 10.6’ 3.2m Adjustable FeetPositioning the Projector CenterFor the U.S.A. and Canada For Continental Europe Connecting the AC Power CordProjector side AC Outlet side 200 240 V ACConnecting to a Computer Cables used for connectionVideo Cassette RecorderVideo Disc Player Connecting to Video EquipmentVideo Source example Component video output Audio OutputBasic Operation Turning On the ProjectorTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control AV System Menu Image Adjust Menu Setting MenuInput Menu PC Adjust Menu Image Adjust Menu Sound Menu Menu BarKeystone Adjustment Zoom AdjustmentFocus Adjustment Picture Freeze FunctionNo Show Function Timer FunctionSound Adjustment Direct OperationComputer Input Input Source SelectionRGB Selecting Computer System Manually Auto ModeComputer System Selection SvgaAuto PC Adjustment PC Adjust MenuAuto PC Adj Manual PC Adjustment Display area ResetMode free Display area HImage Level Selection Direct OperationMenu Operation Image Level Adjustment Screen Size Adjustment Input Menu Video InputInput Source Selection Video, S-Video VideoInput Source Selection Component, RGB Scart 21-pin ComponentComputer in / Component in Jack Y, Pb/Cb, Pr/Cr Video System SelectionVideo Jack or S-Video Jack AutoCinema Picture level adjusted for the picture with fine toneUser preset picture adjustment in Image Adjust Menu P34-35 Image button Standard CinemaTint Item you want to adjust and then press the Select button.Color Press the Point 78buttons to obtain proper color. From 0 toProvides image at a normal video aspect ratio of 4 ProgressiveClose the Image Menu Provides image at a wide screen ratio of 16Setting Setting MenuCeiling Ceiling function Rear function Power managementLamp mode RearFactory default To change the code of the remote controlRemote Control To change the code of the projectorTop Control Maintenance and CleaningProjector is shut down and the Warning indicator lights red Then check the items belowAir Filter Attaching the Lens CoverRecommendation Cleaning the Projection Lens Cleaning the Projector CabinetReset the Lamp Replace Counter Lamp ReplacementReplacement Lamp Type No Model No. of your projectorLamp Replace Counter Reset the lamp replace counterWhen the lamp replace counter is reset, Move the pointer to Yes and then press the SelectTroubleshooting Problem No power Image is out of focusSome displays are not seen during the operation Problem Remote Control does Not work AppendixIndicators and Projector Condition Menu Tree Computer InputMain menu Video Input SettingsSetting Sound SystemCompatible Computer Specifications FreqKHz Technical Specifications COMPONENT-VGA Cable Type No Configuration of TerminalsOptional Parts SCART-VGA Cable Type NoKey to better communications Canada