Computer Input
Display area
Select area displayed with this projector. Select the resolution at the Display area dialog box.
Display area H
Adjust the horizontal area displayed with this projector. Press the Point 7 8 buttons to decrease/increase value to match the resolution of image. Then press the SELECT button.
Display area V
Adjust the vertical area displayed with this projector. Press the Point 7 8 buttons to decrease / increase the value to match the resolution of the image. Then press the SELECT button.
Full screen
Press the Point 7 8 buttons to switch Full screen function to “On” or “Off.” Set “On” to resize the image with 4 x 3 aspect ratio to fit the screen.
Note:
Display area, Display area (H/V) and Full screen cannot be adjusted when 480p, 575p, 480i, 575i, 720i(HDTV) , 1035i(HDTV) or 1080i(HDTV) is selected on PC SYSTEM Menu. ( ☞ P23 ).
Press the SELECT button at the Display area icon to show the Display area dialog box.
Display area
Reset
Reset all adjust parameters on adjustment dialog box to previous figures.
Mode free
To clear adjustment parameters previously set, move the red frame pointer to the Mode free icon and then the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.
Store
To store adjustment parameters, move the red frame pointer to the Store icon and then press the SELECT button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store to and then press the SELECT button.
Quit
Close PC Adjust Menu.
To clear adjustment data
Close this dialog box.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode
Shows values of “Total dots,” “Horizontal,” “Vertical,” “Display area H,” and “Display area V.”
26