Setting Menu

Setting

1	Press the MENU button to display the On-Screen Menu. Press
	the Point 7 8 buttons to move the red frame pointer to the
	SETTING icon.
2	Press the Point d button to move the red frame pointer to the
	item that you want to set. Then press the SELECT button to

display the Setting dialog box.

Language

Language used in the On-Screen Menu is selectable from among English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean and Japanese.

Keystone

This function corrects distortion of a projected image. Select either Store or Reset with the Point 78 buttons, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point ed78 buttons.

Store . . . . . stores the keystone adjustment even if the AC power cord is disconnected.

Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected.

Blue back

When this function is “On,” the projector will project a blue image on the screen if any input signal is not detected.

Display

This function decides whether to display On-Screen Displays. On . . . . . .show all the On-Screen Displays.

Off . . . . . .set On-Screen Displays disappeared except;

•On-Screen Menu

•“Power off?” message ( ☞ P17 )

•P-TIMER ( ☞ P21)

•“No signal” message ( ☞ P37 )

•”Wait a moment!” message

Logo

This function decides what to be displayed on the starting display.

User	···· the image you captured
Default	···· the factory set logo
Off	···· count-down only

Capture

This function is used to capture the image being projected and use it for a start-up display. After capturing the projected image, go to the Logo function (above) and set it as “User”. Then the captured image will be displayed when turning on the projector next time.

To capture the image, select "Yes". To cancel the Capture function, select "No".

Before capturing an image, select Standard in the Image Select Menu to capture a proper image. ( ☞ P27, P33 )

A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. When capturing the image that has been adjusted by Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone adjustment.

SETTING MENU

Set the red frame	Setting Menu icon
Set the red frame
pointer to the item
and press the
SELECT button.

Press the SELECT button at Language to show the Language Menu.

Capture

Select [Yes] to capture the projected image. Select [No] to cancel.

Select [Yes] to stop capturing.